Cylinder with piston rod

Cylinder with piston rod: as a compact cylinder, short stroke cylinder, flat cylinder, round cylinder, miniature cylinder, cartridge cylinder or stainless steel cylinder

Specified types in accordance with the ATEX directive are suitable for explosive atmospheres or are made of corrosion resistant stainless steel and therefore particularly easy to clean.

Online design software

Use your parameters to select the appropriate cylinders and shock absorbers and then click to start the simulation of your pneumatic drive system.

Designing cylinders and shock absorbers

Basic data

P: Flexible cushioning, non-adjustable

PPV: Pneumatic cushioning, adjustable at both ends

New! PPS: Self-adjusting pneumatic cushioning

Profile and tie rod cylinders

		Force [N]	[mm]	PPS	P	PPV		Description
Type	Function	Diameter [mm]	Stroke	Cushioning			Sensing	Standard
Standard cylinder DSBC	Double-acting	32 ... 125 483 ... 7,363	1 ... 2,800	+	+	+	+	ISO 15552 For contactless position sensing Optionally with protection against rotation Standard cylinder DSBC in the catalogue
Standard cylinder DSBF	Double-acting	32 ... 100 483 ... 4,712	10 ... 2,000	+	+	+	+	ISO 15552 Clean Design Increased corrosion protection Optional: dry-running seal DSBF in the catalogue
Standard cylinder DSBG	Double-acting	32 ... 100	1 ... 2,800	+	+	+	+	ISO 15552 Sturdy tie rod design Self-adjusting end-position PPS DSBG in the catalogue
Standard cylinder DNC	Double-acting	32 … 125 483 … 7,363	10 … 2,000	-	0	+	0	ISO 15552 Wide range of variants Profile slot on three sides No protruding proximity sensor Wide range of accessories Standard cylinder DNC in the catalogue

Compact cylinder, short stroke cylinder and flat cylinder

		Force [N]	[mm]	PPS	P	PPV	A
Type	Function	Diameter [mm]	Stroke	Cushioning			Sensing	Description
Compact cylinder ADN/AEN	Double-acting/ single-acting	12 … 125 68 … 7,363	1 … 500	+	+	-	+	ISO 21287 50% less space but the same force as comparable standard cylinders to ISO 15552, ISO 6432 More variants than in the standard Compact cylinder ADN, AEN in the catalogue
Compact cylinder ADNGF	Double-acting	12 ... 100 68 ... 4,712	1 ... 400	+	+	-	+	ISO 21287 Self-adjusting end-position cushioning PPS Compact cylinder with standard port pattern Compact cylinder ADNGF in the catalogue
Compact cylinder CDC, Clean Design	Double-acting	20 ... 80 141 ... 3,016	1 … 500	-	+	-	+	ISO 15552 Easy-to-clean design Increased corrosion resistance Choice of integrated or adapted position sensing Compact cylinder CDC in the catalogue
Compact cylinder ADNP	Double-acting	20 ... 50 188 ... 1,178	50 ... 80	-	+	-	+	ISO 21287 Economical standard cylinder without variants Compact cylinder ADNP in the catalogue
Short-stroke cylinder ADVC/AEVC	Double-acting/ single-acting	4 … 100 7.5 … 4,712	2.5 … 25	-	+	-	+	Standard hole pattern from 32 mm diameter Optimised fitting space and height Housing and piston rod variants ADVC short-stroke cylinder in the catalogue
Flat cylinder DZF	Double-acting	12 … 63 68 … 1,870	10 … 320	-	+	-	+	Extremely flat design Protected against torsion due to piston shape Compact assembly with block mounting Flat cylinder DZF in the catalogue
Flat cylinder DZH	Double-acting	16 … 63 121 … 1,870	10 … 1,000	-	-	+	+	Extremely flat design Protected against torsion due to piston shape Compact assembly with block mounting Flat cylinder DZH in the catalogue
Flat cylinders EZH	Single-acting	1.5, 2.5, 5, 10 3 … 205	10 … 50	-	-	-	+	Extremely flat design Protected against torsion due to piston shape Compact assembly with block mounting Flat cylinder EZH in the catalogue

Round cylinder

		Force [N]	[mm]	P	PPV	A
Type	Function	Diameter [mm]	Stroke	Cushioning		Sensing	Description
Standard cylinder DSN/ESN	Double-acting/ single-acting	8 … 25 30 ... 295	1 … 500 1 … 50	+	+	-	ISO 6432 Quick reacting thanks to minimal break-away force Good running performance and long service life Standard cylinder DSN/ESN in the catalogue
Standard cylinder DSNU, ESNU	Double-acting/ single-acting	8 … 25 30 ... 295 No standard: 32 ... 63 483 ... 1,870	1 … 500 1 … 50	+	+	0	ISO 6432 Wide range of variants Quick reacting thanks to minimal break-away force Good running performance and long service life New! DSNU-PPS with self-adjusting PPS cushioning Standard cylinder DSNU, ESNU in the catalogue
Standard cylinder DSNUP	Double-acting	16, 20, 25 121 ... 295	25, 50, 100	+	-	+	ISO 6432 Cost-optimised Wrought aluminium alloy cylinder barrel Polyamide bearing and end caps For position sensing Standard cylinder DSNUP in the catalogue
Miniature cylinder EG	Single-acting	2.5 … 25 68 … 215	1 … 80	+	-	-	Sturdy Minimal static and sliding friction Good running performance Miniature cylinder EG in the catalogue

Stainless steel cylinder

		Force [N]	[mm]	P	PPV	A
Type	Function	Diameter [mm]	Stroke	Cushioning		Sensing	Description
Stainless steel cylinder CRDSNU		12 … 25 68 … 295 No standard: 32 ... 63	10 … 500	+	-	+	ISO 6432 Wide range of accessories Animation cushioning variants for CRDSNU Standard cylinder ISO 6432 in the catalogue
Stainless steel cylinder CRHD	Double-acting	32 … 100 483 … 4,712	10 … 500	-	+	+	Corrosion resistant Greater flexibility thanks to various end caps Stainless steel cylinder CRHD in the catalogue
Stainless steel cylinder CRDNG	Double-acting	32 ... 125 482 ... 7,360	10 ... 2,000	-	+	+	ISO 15552 Corrosion resistant Wide range of accessories Stainless steel cylinder CRDNG in the catalogue

Screw-in/screw-on cylinders

Type	Function	Diameter [mm]	Stroke	Cushioning	Sensing	Description
		Force [N]	[mm]	P	PPV	A
Multimount cylinder DMM/EMM	Double-acting	10 … 32 47 … 483	5 … 50	+	-	+	Compact cylinder with multifunctional mounting options Small, light and reliable Direct mounting Multimount cylinder DMM/EMM in the catalogue
Cartridge cylinder EGZ		6 … 16 14 … 109	5 …15	-	-	-	Versatile uses in handling Minimal fitting space Stroke end position adjustable Cartridge cylinder EGZ in the catalogue

Type

Function

Diameter [mm]

Stroke

Cushioning

Sensing

Description

Force [N]

[mm]

PPV

Multimount cylinder DMM/EMM

Double-acting

10 … 32
47 … 483

5 … 50

Compact cylinder with multifunctional mounting options
Small, light and reliable
Direct mounting

Multimount cylinder DMM/EMM in the catalogue

Cartridge cylinder EGZ

6 … 16
14 … 109

5 …15

Versatile uses in handling
Minimal fitting space
Stroke end position adjustable

Cartridge cylinder EGZ in the catalogue

+ Standard, i.e. always available

0 Option, i.e. selectable

Linear drives for process automation

Type	Function	Diameter [mm]	Stroke [mm]	Beschreibung
Linear drive DFPI	Doubleacting	100, 125, 160, 200, 250, 320	40 ... 990	With integrated displacement encoder (potentiometer) Available with integrated positioning controller and valve manifold Sturdy and compact housing with high degree of protection Ideal for outdoor use thanks to high degree of corrosion protection Suitable for use in water, industrial process water and sewage technology, as well as the silage and bulk goods industry Easy to integrate into an existing control architecture Linear drive DFPI in the catalogue

Type

Function

Diameter [mm]

Stroke [mm]

Beschreibung

Linear drive DFPI

Doubleacting

100, 125, 160,

200, 250, 320

40 ... 990

With integrated displacement encoder
(potentiometer)
Available with integrated positioning controller and valve manifold
Sturdy and compact housing with high degree of protection
Ideal for outdoor use thanks to high degree of corrosion protection
Suitable for use in water, industrial process water and sewage technology, as well as the silage and bulk goods industry
Easy to integrate into an existing control architecture

Linear drive DFPI in the catalogue

www.festo.se

Cylinder with piston rod

Online design software