Semi-rotary drives

Compact swivel modules with small fitting space and adjustable swivel angles, as well as modular as twin piston rotary drive

Selected types conform with the ATEX directive for potentially explosive atmospheres.

Possible combinations

Suitable grippers

 
Type Diameter [mm] Swivel angle Sensing Mass moment of inertia Description
  Torque [Nm] [°] A [kgm²]  

Swivel-linear drive unit DSL-B

DSLB

 

 

16 ... 40

1,25 ... 20

 

0 ... 246 (CC)

0 ... 270 (P)

 

+ 0.000035 ...
0.004 kgm²
  • Rotation and linear motion can be controlled individually or simultaneously
  • High repetition accuracy
  • With plain or recirculating ball bearing guide
  • Through piston rod

Swivel-linear drive unit DSL in the catalogue

Semi-rotary drive DRQD
Semi-rotary drive DRQD

DRQD-B

6 … 50
0,16 … 50
0 … 360 + up to 2.000 x 10E-4 kgm²
  • With twin pistons based on the rack and pinion principle
  • High accuracy
  • Extremely good rigidity
  • Wide range of variants
  • With spigot or flanged shafts

Semi-rotary drive DRQD in the catalogue

Product animation DRQD

Swivel module DSM
Swivel module DSM

DSM-B

6 … 63
0,15 … 40
0 … 270 + up to 1.500 x 10E-4 kgm²
  • Minimal fitting space
  • Adjustable swivel angle
  • Splash-proof and dust-proof
  • With spigot or flanged shafts

Swivel module DSM in the catalogue

Product animation DSM

Semi-rotary drive DSR
Semi-rotary drive DSR
10 … 40
0,5 … 20
0 … 180 + up to 150 x 10E-4 kgm²
  • Wide variety of mounting options
  • Infinitely adjustable swivel angle
  • Wide range of accessories

Semi-rotary drive DSR in the catalogue

Semi-rotary drive DRQ
Semi-rotary drive DRQ
16 … 100
0,5 … 150
0 … 360 + up to 2.000 x 10E-4 kgm²
  • Variable end-position adjustment at both ends
  • Backlash-free power transmission
  • Wide choice of mounting options

Semi-rotary drive DRQ in the catalogue

 

Servo drives for process automation

Type Diameter [mm]
Torque [Nm]
Swivel angle
[°]
Description

Semi-rotary drive DFPB

DFPB

 

New!

 

double acting:

10 ... 1.050

7 ... 945

single acting:

10-S ... 520-S

1 ... 882

 

0 ... 90
  • Identical torque characteristic across the entire rotation angle range of 90°
  • Process valve connection to ISO 5211on both sides
  • Can be mounted on all process valves using pressure relief slot
  • Mounting hole pattern to VDI/VDE 3845
  • Sturdy, non-slip and easy-to-clean aluminium housing
  • Long service life, low wear 
  • Increased corrosion protection

Semi-rotary drive DFPB in the catalogue

Quarter-turn actuator DAPS
Quarter-turn actuator DAPS

Size  0015 … 1920
15 … 1,920
0 … 90
  • Torque characteristics matched to the process valves
  • Compact
  • Simple and sturdy mechanical system

Quarter-turn actuator DAPS in the catalogue

Animation: Drives for process automation