Support Portal

With the "Quick search application" you can get catalogue information in no time.

• Fast access to online catalogue information
• Direct connection to the online shop
• Direct connection to selection and dimensioning tools

A Festo menu is added to your CAD system, by means of which part selection is seamlessly integrated.

Advantages:

• Much faster component modelling

• Quick assembly layouts including matings

• No additinal application is needed

• Use of your own system templates

• Individualised configuration of interface settings

Supported CAD system versions: Autodesk Inventor 2009 - 2013

A Festo menu is added to your CAD system, by means of which part selection is seamlessly integrated.

Advantages:

• Much faster component modelling

• Quick assembly layouts including matings

• No additinal application is needed

• Use of your own system templates

• Individualised configuration of interface settings

Supported CAD system versions: Solid Edge V20, ST - ST5

Please note: Festo PARTdataManager 2013 has to be installed.

Advantages:

• Much faster component modelling

• Quick assembly layouts including matings

• No additinal application is needed

• Use of your own system templates

• Individualised configuration of interface settings

Please note: Festo PARTdataManager 2013 has to be installed.

Supported CAD system versions:

• Pro/Engineer WF3 - WF5

• Creo Parametric 1 - Creo Parametric 2

A Festo menu is added to your CAD system, by means of which part selection is seamlessly integrated.

Advantages:

• Much faster component modelling

• Quick assembly layouts including matings

• No additinal application is needed

• Use of your own system templates

• Individualised configuration of interface settings

Supported CAD system versions: SolidWorks 2007 - 2013.

Please note: Festo PARTdataManager 2013 has to be installed.

Supported Products:

• ADN
• ADNGF
• DSNU
• CRDSNU
• DSBC
• DSBF
• DSBG

Requirements: .net-Framework 3.5

Juggling pencils and calculators is now a thing of the past. Whether discs, cuboids, push-on flanges, grippers, etc: this tool does the job of calculating all mass moments of inertia for you. Just save, send or print – and you’re finished.

Quickly and conveniently determine your system's air consumption. Simply capture all drives and hoses, set cycle times and working pressure and the air consumption is already calculated per minute and per day. The input table and results can be exported directly to Excel.

This tool helps you to select the correct Festo feed separator of type HPV for your application.

This tool helps you to select the correct Festo rotary indexing table of type DHTG for your application.

Whether diagonal or vertical, curved or straight, lever or disc: all types of cushioned movements are accounted for here. The tool always suggests the correct shock absorber.

To choose the right gripper you need to calculate the weight, direction of movement, distances, etc. The software tool tells you immediately which of the parallel, radial, angle or 3-point grippers you need to use, and in which size.

To choose the right gripper you need to calculate the weight, direction of movement, distances, etc. The software tool tells you immediately which of the parallel, radial, angle or 3-point grippers you need to use, and in which size.

To choose the right gripper you need to calculate the weight, direction of movement, distances, etc. The software tool tells you immediately which of the parallel, radial, angle or 3-point grippers you need to use, and in which size.

To choose the right gripper you need to calculate the weight, direction of movement, distances, etc. The software tool tells you immediately which of the parallel, radial, angle or 3-point grippers you need to use, and in which size.

Which compressed air quality classes are required for which applications and which products are the right ones? This selection tool supports configurating an appropriate service unit based upon the knowledge of our experts.

Perfect simulations replace expensive reality tests. GSED is an expert system that helps you select and configure the entire pneumatic control sequence. If an entered variable is changed, the program automatically adopts it for all further values.

Festo PARTdataManager can be installed as a separate application. 

Take advantage of comprehensive full-text searches, e.g. for part numbers, product lines or designation.

2D/3D CAD interfaces for:

• AutoCAD

• Autodesk Inventor™

• CATIA V5

• Pro/ENGINEER

• NX™

• SOLID EDGE

• SolidWorks

Application to convert FCT components for device family CMMP-AS from version 1.x to version 2.x.

Configuration and commissioning software for the motor controller CMMP-AS

• FCT PlugIn CMMP-AS v2.1.1.25
  CMMP-AS: FW V3.5.1501.5.3 or higher
  CMMP-AS-...-M3: FW V4.0.1501.1.1 or higher

• FCT PlugIn CMMP-AS v2.0.1.55
  CMMP-AS: FW V3.5.1501.5.3 or higher
  CMMP-AS-...-M3: FW V4.0.1501.1.1 or higher

• Festo Configuration Tool v1.2.1.3

Dimensioning of electromechanic linear axes and electrical motors: Find a solution with only a few basic data

The program calculates the right vacuum suction cup for your application. All you need to do is input the required parameters and the program will then determine solutions ranging from a simple vertical linear movement right through to freely positionable suction cups with linear and circular motion.

This program allows you to do an application-specific selection within the large variety of tubing.

English
Soft Stop can practically turn the impossible into reality. Travel times are shortened by as much as 30% for pneumatic drives and vibration is greatly reduced. The selection program performs all of the necessary calculations.

Español
El Soft Stop puede hacer realidad lo que parecía imposible. Los tiempos de recorrido de actuadores neumáticos se reducen en un 30% y disminuyen drásticamente las vibraciones. El programa de selección realiza todos los cálculos necesarios.

Français
Ce logiciel vous permet de configurer un système Soft Stop de l'actionneur au système de commande en quelques étapes. Le système Soft Stop transforme l'impossible en possible : réduit les temps de cycle jusqu'à 30% et diminue de manière drastique les vibrations.

This software selects a shock absorber suited to your particular application. Cases such as horizontal or angled configuration, swinging lever, rotating disc or swinging mass can be selected.

English
This program calculates the moment of inertia of various basic bodies and Festo standard components.

Español
Cálculo del momento de inercia
Este programa calcula el momento de inercia de varios cuerpos básicos y de componentes estándar Festo.

Français
Calcul de moments d’inertie
Quelle que soit la forme ou la nature de la pièce, ce logiciel vous permet de calculer son moment d'inertie. Sauvegarder, transférer ou imprimer les résultats.

Do you have an application for the Festo Fluidic Muscle? With this tool you can easily simulate a single tensile actuator or a pneumatic tension spring. A comprehensive product configuration, accessory selection and parts list are included.

Compressed air requirements for pneumatically actuated valves in water treatment plants can be calculated with Aircon. Beyond this, required compressed air reservoir capacity can be ascertained, and valves can be automatically configured for use with Festo actuators.

Helps you sort out the feeding process! This tool will provide you with a suitable Festo feed separator type HPV for your process application.

This program calculates the correct size of Festo dryers by showing possible solutions for individual apllications. Afterwards direct links are making it comfortable to find its way to the to the online catalogue.

Also measurement units like Celsius vs. Fahrenheit can be easily changed to the particular needs.
Furthermore the tool gives a short overview about the different drying principles and leads with direct links to the online catalogue.