Pneumatic drives
Servo-pneumatic positioning systems
Electric drives
Motors and controllers
Handling systems
Vacuum technology
Valve terminals
Motion Terminal
Image processing systems
Compressed air preparation
Pneumatic fittings system
Electrical connector technology
Control technology
Other pneumatic equipment
Process automation
Ready-to-install solutions
Function-specific systems

Search result for CPX

Results: 37
Valve terminals > Universal valve terminals > Valve terminals VTSA-F
Core product range
  • Electrical interlinking via sub-base
  • Comprehensive pneumatic safety functions
  • 5 valve sizes in the mix
  • Controlled via fieldbus or control block
  • Max. 32 valve positions/max. 32 solenoid coils
  • Max. 10 electrical modules
    • Digital inputs/outputs
    • Analogue inputs/outputs
    • Parameterisation of inputs and outputs
    • Convenient, integrated diagnostics
    • Preventive maintenance concepts
  • Flow-optimised
  • Connecting thread: G
Control technology > Electrical peripherals
  • Components for integrating decentralised modules in the CPX automation platform
  • ideal for generating subsystems
Control technology > Electrical peripherals
  • Cover for valve terminals MPA and CPX
  • Space-saving thanks to compact dimensions
  • No engineering effort, easy to order and matched to the valve terminal.
Motors and controllers > Controller
  • Controller CMXH
  • Motion controller CPX
Compressed air preparation > Service unit combinations > Series MS modular and configurable
  • Intelligent service unit component for energy-efficient operation of pneumatic systems.
  • Combination of pressure regulator, on/off valve, sensor technology and fieldbus communication
    • regulated outlet pressure
    • detection of system downtime by flow measurement
    • stand-by pressure regulation
    • leakage detection
    • adjustable regulated pressure rise (soft-start)
  • Expandable with CPX system
Compressed air preparation > Service unit combinations > Series MS modular and configurable
  • Energy efficiency module as an extension for the new MSE6-C2M or a CPX terminal
    • low-cost without bus nodes
    • leakage detection
    • pressure measurement
    • flow measurement
Motion Terminal
  • Flow rate: 480 l/min
  • Voltage: 24 V DC
  • Pressure: -0.9 ... 8 bar
  • Degree of protection: IP65
  • Sub-base valves
  • Metal manifold rail
  • Fieldbus connection via modular electrical terminal CPX
Valve terminals > Universal valve terminals > Valve terminals VTSA-F
New product as of 4/2020
  • Electrical interlinking via sub-base
  • Extensive pneumatic safety functions
  • New pneumatic interface, optionally with PROFIsafe
  • Serial communication in the pneumatic section, up to 96 valves
  • Up to 4 voltage zones possible in the pneumatic section
  • New pilot air valve and soft-start valve with integrated pressure switch for sensing the exhausted state
  • New vacuum generator with air-saving circuit, optionally with ejector pulse and integrated connection, parameterisation with CPX system
Valve terminals > Universal valve terminals
  • Widths: 10, 14 and 18 mm
  • Flow rates: 400, 800 and 1600 l/min
  • Diverse valve functions and
  • additional functions
  • Connection to the CPX electronic terminal via CP interface.
Servo-pneumatic positioning systems > Sensor interfaces
  • The sensor interface CASM is used to actuate pneumatic drives with analogue/incremental displacement encoders at a position controller CPX-CMAX or CPX-CMPX.
Electrical connector technology > Connecting cables > Connecting cables for valve terminals
  • Connecting cable for connecting the operator unit CPX-MMI-1
  • Cable length 1.5 and 3.5 m
Electrical connector technology > Connecting cables > Connecting cables for power applications
New product 11/2019
  • Cables for the power supply to the automation system CPX-AP
Servo-pneumatic positioning systems > Drives with displacement encoder > Linear drive with displacement encoder
  • Measures absolute values
  • Protection: IP67
  • For attachment to the customer’s own guide
  • Diameter 25, 32, 40, 63 mm
  • Stroke length 100 ... 2000 mm
  • Force 295 ... 1870 N
  • Max. speed 3 m/s
  • Repetition accuracy with the position controller CPX-CMAX +/- 0.2 ... 0.8 mm.
Control technology > Operator units
Core product range
  • Display and control unit for the servo drive CMMT and the automation system CPX-E.
  • Colour touchscreen
  • Diagnostic function
  • Update function for basic unit
Valves > Accessories for valves > Adapter plates
  • Pneumatic interface
  • Adaptation of ISO sizes 3 to VTSA/VTSA-F valve terminal
  • Pneumatic interface for terminal CPX/VTSA
  • Dashboards for
    • Energy efficiency module MSE6-E2M
    • Valve terminal MPA/CPX
Valve terminals > Accessories for valve terminals > Sub-bases / manifolds > Universal valve modules
  • Sub-bases
  • Blanking plates
  • End plates
  • Supply plates.