|
Process automation
>
Sensor boxes
|
|
|
- Measuring principle electromechanical or magnetic reed
- Switching element function Toggle switch, single-pole (SPDT)
- For DC and AC
- Pre-fitted mounting bridge
- Cable connector and blanking plug included in the scope of delivery
|
|
|
|
|
Process automation
>
Sensor boxes
|
|
|
- Measuring principle: electromechanical or magnetic reed or inductive
- Switching element function toggle switch, single-pin (SPDT) and double-pin (DPDT)
- Switching outputs PNP, NPN, 2-wire, DC, NAMUR
- For DC and AC voltage
- Pre-fitted mounting bridge
- Suitable for use in potentially explosive areas
|
|
|
|
|
Process automation
>
Sensor boxes
|
|
|
- Inductive measurement principle with dual sensor
- Switching component function N/O, in the case of AS-Interface selectable N/C - N/O
- Operating voltage 6 ... 60 V DC
- Direct mounting on quarter turn actuators to VDI/VDE 3845
|
|
|
|
|
Process automation
>
Positioners
|
|
|
- Positioner for double-acting quarter turn actuators for control of shut-off or ball valves in process automation.
|
|
|
|
|
Process automation
>
Pilot valves
|
|
|
- All solenoid coils can be used on an armature tube
- Connection: G¼, NPT¼
- Flow rate: 900 ... 1000 l/min
- Voltage: 12, 24, 48 V DC, 24, 48, 120, 230 V AC
- NAMUR port pattern to VDE/VDI 3845
- Solenoid-actuated, piloted
- Mechanical spring return
- Diverse Ex solenoid systems, IEC Ex, FM EX
- Convertible from 5/2-way function to 3/2-way function
|
|
|
|
|
Process automation
>
Pilot valves
|
|
|
- Internal/external pilot air reversing via internal shuttle valve
- Valve function 3/2, 5/2 monostable and bistable
- Port G1/4, G1/2, NPT1/4, NPT1/2 and Namur
- Voltage 24, 110, 230 V DC, UC
- Explosion protection EX me and EX ia, ATEX
- Sturdy and corrosion-resistant thanks to tough enamel surface
|
|
|
|
|
Process automation
>
Pilot valves
|
|
|
- Connection: G¼, G¼, NPT¼ and Namur
- Voltage: 24, 110, 230 V DC, AC, UC
- Explosion protection: EX me and EX d, ATEX
- Robust and corrosion resistant thanks to hard-ematalised surface
- SIL certificate for ESD applications.
|
|
|
|
|
Process automation
>
Ball valves and ball valve units
|
|
|
- Port Rp 1/4, Rp 3/8, Rp 1/2, Rp 3/4, Rp1, Rp1 1/4, Rp1 1/2, Rp2, Rp2 1/2, Rp3, Rp4
- Flow rate 2000 ... 23500 l/min
- Flange hole pattern to ISO 5211
- Mechanically actuated
- Corrosion and acid-resistant designs
- 2-way ball valve
|
|
|
|
|
|
|
|
|
Process automation
>
Ball valves and ball valve units
|
|
|
- Port Rp 1/4, Rp 3/8, Rp 1/2, Rp 3/4, Rp1, Rp1 1/4, Rp1 1/2, Rp2, Rp2 1/2
- Flow rate 100 ... 8900 l/min
- Electric and pneumatic actuation
- Ball valve with drive
- Namur port pattern, VDI/VDE 3845
- Corrosion and acid-resistant designs
- 2-way on-off valve
|
|
|
|
