Once the industrial robot gripper is mounted, its functions still need to interact correctly with the robot program. Depending on the gripping technology and application, this can include tool commands such as opening, closing, generating vacuum, and the processing of status signals within the robot sequence.

Festo function blocks for robot gripper control provide a preconfigured starting point for this part of robot gripper integration. Instead of implementing comparable basic functions from scratch for every project, users can work with defined software elements for selected combinations of Festo gripper and robot platform. This can reduce repeated programming during integration and initial commissioning.

Robot users and system integrators often want to combine the robot platform that fits their automation concept with the gripping technology that fits the application. The platform-specific function blocks that Festo has developed for selected robot and gripper combinations at the software interface facilitate this. Collaboration with robot manufacturers is continuously being strengthened, while the available integration options are further expanded.

The aim is not one universal program for every robot. Instead, preconfigured function blocks for robot gripper control provide defined integration points within supported robot environments. This can also make it easier for machine builders and system integrators to evaluate compatibility and implementation effort before a solution is selected.

Many robot manufacturers offer dedicated ecosystem areas on their websites to help users find compatible solutions for different applications. Festo is represented in these ecosystems, as well as through its own end-of-arm portfolio. For a broader view of grippers, vacuum technology, engineering tools and EOAT solutions, visit the Festo end-of-arm tooling overview.

The availability of robot gripper function blocks depends on the specific combination of robot platform and Festo product. According to the current project status, function blocks are available for parallel gripper HPPH with Universal Robots and ABB, and for vacuum generator OVEH with Universal Robots. Delta integrations are in preparation, while collaboration with Comau is being established and expanded.

Because software packages and partner listings can change, check the relevant product, support or robot manufacturer page for the latest release status before selecting a solution.

A robot gripper function block – sometimes called Add-In or Plug-In – is a preconfigured software element that connects specific gripper functions and status signals with a specific robot platform.

In practical terms, it provides a structured software interface for certain industrial gripper robot combinations. This can give developers a more consistent starting point than repeatedly implementing similar basic functions for each integration project.

Function blocks can simplify access to preconfigured tool functions, basic integration within a supported robot environment, the use of defined signal and status structures, repeated implementation of similar functions and the initial commissioning workflow.

The benefit is therefore not that there will be no more engineering work. Instead, the benefit is that a defined part of the robot gripper software integration and programming has already been preconfigured. This can make the remaining integration scope of robot gripper control more transparent, especially for system integrators and machine builders.

Robot gripper function blocks do not automatically define the mechanical interface and payload calculation, the design of gripper fingers or suction cups, application-specific robot movement or the handling of every possible fault condition.

Based on the current release status, robot gripper function blocks are available for:

Further integrations e.g. for Delta, Comau and KUKA robots as well as for Festo valve terminals are being developed. Their status should always be checked before a solution is specified or implemented.

No. Function blocks simplify an important part of software integration and robot gripper programming, but they do not automate the complete application.

They are one part of the overall end-of-arm tooling solution. Mechanical installation, connections, tool configuration, robot movements, gripping parameters, safety and validation remain specific to the application.