Get in touch with us!
If you have any questions about the lists of approved components or need any other information, please use the
at the end of this page to get in touch with us.List of approved components for Audi Neckarsulm – assembly line
A list of approved components was created together with Audi in Neckarsulm. It contains all the Festo products that can be used in the assembly line at the Neckarsulm plant.
The technical assembly department at Audi is the point of contact for the Audi NSU assembly list of approved Festo mechanical components. A copy of the list can be obtained from them.
Lists of approved components for unit production at Audi Györ and Ingolstadt
The VW lists of approved components for component production apply to unit production at the Györ and Ingolstadt plants. These were created in cooperation with Audi, Skoda and Volkswagen and are based on the current requirement specifications for mechanical systems for component production of the Volkswagen Group.
List of approved components for mechanical and pneumatic systems (PDF)
List of approved components for electrical systems (PDF)
Click here to download the circuit diagrams for the service modules (see Section 3.6.11 in the list of approved components):
Circuit diagrams for service modules for unit production (DXF format)
Product datasheets for the Audi list of approved electric components
The product datasheets have been created based on the Audi AG list of approved electric components.
These datasheets apply to automation technology in the body shop, paint shop and assembly line at the plants in Ingolstadt, Neckarsulm and Brussels.
If you have any queries, please get in touch with your contact person at Festo:
Axel Flak
Sebastian Wörner
Specification for the Aurobay plants in Sweden and China
This specification contains all generally approved components and configurations of Festo components for pneumatics, electropneumatics and local controllers for the Aurobay plants in Skövde (Sweden) and Zhangjiakou (China).
It defines products and automation concepts that are state of the art and ensure global availability.
The availability of the products includes the offer of additional services for Aurobay.
List of approved components for Autoliv Vårgårda – Sweden
The list of approved components contains all the components approved for Autoliv projects with links to documents and other information in the Festo catalogue.
Lists of approved components for the Bentley Crewe plant
This project manual is applicable for the Bentley Crewe plant. It was created together with Bentley and is based on the current requirements specification.
If you have any queries, please get in touch with your contact person at Festo:
Axel Flak
Sebastian Wörner
Festo is proud to be a Best Practice Partner for all global BMW projects.
The BMW technology areas and Festo have therefore jointly created globally valid lists of approved components and project manuals for standardisation in order to support general contractors, system and machine builders (SE partners) when selecting suitable and approved products.
Body shop (TKB)
Globally valid list of approved components to BMW standard V7, V8x for the body shop technology area:
BMW list of approved components for the body shop (PDF)
VTSA-F-FB valve terminal configurator to BMW standard V7, V8x for the body shop technology area:
Valve terminal configurator (XLS)
Cross-technology standard TA/TEM/TMO/MT-5x/TFO
Component Manual
Applies to the following BMW technologies:
Powertrain (TA), Power Module (TEM), Assembly (TMO), Chassis Driveline (MT-5x), Foundry (TFO).
Note: The technology-specific approvals of the BMW ADM (ArticleDataManager) must be observed!
Project participants receive information and regulations about the latest projects on the digital B2B portal of the BMW Group.
Special approvals are possible in exceptional cases in consultation with the BMW project manager.
Valve terminal configurator (XLS)
Powertrain (TA-, MT-5x)
Applies only to existing installations and integrations. The BMW Component Manual V1.1TA/TEM/TMO/MT5x/TFO applies to new systems (GEN 6) – see above
List of approved components for the powertrain technology area for the following BMW plants: Munich, Dingolfing, Landshut, Regensburg, Berlin, Leipzig (Germany) as well as Steyr (Austria), Hams Hall (Great Britain) and Shenyang (China).
BMW list of approved components for the powertrain (PDF)
Project participants receive information and regulations about the latest projects on the digital B2B portal of the BMW Group.
Special approvals are possible in exceptional cases in consultation with the BMW project manager.
If you have further questions or require support, please get in touch with the BMW team at Festo:
Ronny Dentler
Hilmar Klee
Dietmar Düll
Worldwide list of approved Festo components for Brose plants
The list of approved components contains all the generally approved components and configurations for pneumatic and electric automation technology.
Special releases are possible in exceptional cases in consultation with the project manager at Brose.
Scope of validity: worldwide for all Brose locations
The specification is used for all new purchases, conversions and extensions.
CNH-FPT INDUSTRIAL project manual
CNH-FPT INDUSTRIAL and Festo have created a global project manual for powertrain projects to help machine and system builders select suitable and approved products.
Both the specifications of CNH-FPT INDUSTRIAL and the global standards have been taken into account.
The Festo project manual complements CNH-FPT INDUSTRIAL's specifications and specifies the components that can be used in powertrain projects to build machines and systems.
CNH-FPT INDUSTRIAL project manual cover page (PDF in English)
List of approved components for DAF
Together with DAF Eindhoven, we created a list of approved standard components. It contains all the approved Festo products for automation in the body shop, the paint shop, final assembly and engine production in Eindhoven (NL) and Westerlo (BE). The approval of components not included on this list is subject to consultation with the relevant DAF N.V. engineers.
The Ford Motor Company is one of the largest car manufacturers in the world and one of the most important customers of Festo. The size and global presence of Ford has led Festo to set up a Ford Customer Team that will support all Ford plants worldwide, as well as the machine and system builders during projects.
Ford Customer Team
If you have questions about current Ford projects or other topics, please contact Alexander Kluge.
Project manuals
For most Ford projects, Festo has created project manuals that describe the current status of the approved components. In addition, the project manuals provide planners and engineers with support when designing new machinery and systems for the Ford Motor Company.
Project manuals are available for these projects, among others. Please contact your local Festo office.
Valencia plant (Spain) - Project CX482 (Kuga)
Craiova plant (Romania) - Project BX726 (B-CUV)
Plant - Cologne and Saarlouis - Projects B479 (Fiesta) and C519 (Focus)
Plant: Thailand, South Africa and South America - Projects P703 and U704
Ford final assembly
Global powertrain specification
Festo is the preferred component manufacturer for all Ford global powertrain projects. The global list of approved components for Ford powertrain projects is available on the Ford Covisint platform. You can also download the Festo project manual from there.
If you have any other questions or require support, please contact the Ford Customer Team at Festo.
General Motors operates two joint ventures in China.
1. SAIC General Motors Corporation Limited (SAIC-GM or 'SGM')
We have jointly produced a project manual for the SAIC-GM powertrain
We have also produced a project manual for SAIC-GM battery assembly
2. SAIC General Motors-Wuling (SAIC-GM-Wuling or 'SGMW')
SAIC-GM-Wuling is a joint venture between SAIC Motor, General Motors and Liuzhou. Wuling Motors Co Ltd. manufactures commercial and private vehicles that are sold in China under the brand names Wuling and Baojun. SGMW is a major manufacturer of mass-produced products in the domestic Chinese market and one of the largest manufacturers of microvans in China.
We created a project manual for the SGMW powertrain
This list of approved components was drawn up in cooperation with Iveco.
It contains all the Festo products that may be used.
Festo is proud to be a Preferred Supplier Partner for all global JLR projects.
JLR and Festo have produced joint global project manuals for JLR projects to help plant and system engineers and builders select suitable and approved products.
If you have any other questions or require support, please contact the JLR Team at Festo:
Jlrenquiries.gb@festo.com
List of approved components for JLR projects
This document indicates which product series have been approved for use. Any deviation from this must be approved in writing by JLR Standards and Controls.
Festo preferred products list (PDF)
JLR Project Manual
This document is intended to help plant and system engineers and builders meet the JLR requirements.
VTSA-FB valve terminal configurator
This Excel tool is designed to help plant and system engineers and builders specify a valve terminal configuration.
Valve terminal configurator (ZIP)
Guides for easy product commissioning
Easy-to-use instructions for commissioning and replacing products.
OVEM vacuum generator: easy setup guide (PDF)
SFAM flow meter for BIW (PDF)
SFAM flow meter for the powertrain (PDF)
Customised solutions: CAD and datasheets
CAD models and datasheets for non-catalogue products
MS9 Zone Stand Large – datasheet (PDF)
MS9 Zone Stand Large – CAD (ZIP)
MS6 Zone Stand Small – datasheet (PDF)
MS6 Zone Stand Small – CAD (ZIP)
Preferred product list for Magna Powertrain ILZ
This preferred product list was created in cooperation with Magna Powertrain ILZ. The approvals apply to the ILZ plant.
Preferred product list for Magna Powertrain ILZ (PDF)
Preferred product list for Magna Steyr for the G30, X 540, X 590, MOPF, GJ29 projects
This preferred product list was created in cooperation with Magna Steyr Fahrzeugtechnik Graz for the body shop. The approvals apply to the body shop at the Graz plant for the G30, X 540, X 590, MOPF, and GJ29 projects as well as subsequent projects.
Preferred product list for Magna Steyr Fahrzeugtechnik body shop version 1.11 (PDF)
In addition, there are two configurators for the valve terminal type 45 (CPX-VTSA-F) (1x bus node FB44 Profinet RJ45 for new systems with TIA Portal, 1x bus node FB45 SCRJ for integration in S7 systems), which make it easier for you to configure the valve terminal (version 1.4).
Valve terminal configurator CPX VTSA-F (integration into S7 systems)
Valve terminal configurator CPX VTSA-F (new systems TIA Portal)
List of approved components for engine production by MAN Truck & Bus in Nuremberg (production department)
You can find the list of approved components for projects for the MAN Truck & Bus engine plant in Nuremberg, including links and other relevant information, here.
List of approved components for MAN Truck & Bus Nürnberg (PDF)
If you have any questions, please get in touch with your contact person at Festo:
Ken Kiesewalter
Sebastian Wörner
Festo is a project partner of Mercedes Benz in the worldwide standardisation lines of the INTEGRA 5, INTEGRA 6 and INTEGRA 7 car body plants and the powertrain plants according to SPPA requirement specifications. Mercedes Benz and Festo have created joint global project manuals in order to help system and machine builders select suitable and approved products.
Project participants receive information about the latest projects and regulations on the corresponding portals from Mercedes:
That is also where you can find all the latest lists of approved components, project manuals and valve terminal configurators from Festo. The lists of approved components and project manuals specify the components that can be used in the individual projects for building the specific machines and systems.
The project planning guide according to the Mercedes-Benz pressing tool standard can be found here:
Project planning aid in accordance with the Mercedes-Benz pressing tool standard (PDF)
If you have any other questions, please contact:
Project manual for Porsche Zuffenhausen
A project manual was drawn up for the Zuffenhausen plant in cooperation with Porsche.
Porsche Zuffenhausen project manual
CPX/MPA valve terminal configurator for the modules area
There are appropriate lists of approved components and valve terminal configurators for other plants and areas. These documents are available on request.
If you have any queries, please get in touch with your contact person at Festo:
Axel Flak
Sebastian Wörner
Have you worked for the Renault Group?
Festo has worked closely with Renault to select the right pneumatic components as well as motion controllers for electric drives based on the requirements specified by Renault.
Please ask your local contact at Festo, who will assist you with preparing an offer or help you with project engineering.
Quickly making the right selection saves money!
Global overview of Festo products requested by the Renault Group 2021 (PDF in English)
As part of the Renault project, Festo supports all Renault teams and partnerships with the production of the RFQ/engineering with the "Global Overview", as well as with the "Renault Project Synthesis Book", which was created specifically for the ongoing Renault project.
In the "Global Overview..." you will find ... Your contact at Festo in order to receive the "Document of Synthesis for Renault project XXX".
Many applications that have already been carried out with Renault are standardised, such as air unit panels or electric drive applications, in order to reduce the development time and the risks in your project. Don’t hesitate and call Festo now!
As a part of the TRATON Group (formerly Volkswagen Truck & Bus), SCANIA is one of Festo’s key global customers. SCANIA manufactures heavy trucks and buses at its main locations in Europe and South America. Festo supports SCANIA AB globally with its SCANIA Customer Team, both at its local plants and with new projects.
SCANIA Customer Team
For questions about ongoing SCANIA projects or other topics, please get in touch with your Festo contacts.
Project manuals
Festo has created project manuals for SCANIA projects. These project manuals contain information on the current specification status and other, additional functions that may be of help when designing systems for SCANIA AB.
SCANIA Oskarsham (SE) and SCANIA Sao Bernardo (BR)
Cab production: Scania CV specification BiW (PDF in English)
SCANIA New Foundry Södertälje
A project manual has been created for the “New Foundry” project in Södertälje: Project manual "New Foundry"
If you have any questions, please get in touch with your contact person at Festo:
Project manuals for FCA powertrain projects
FCA and Festo have created joint global project manuals for powertrain projects in order to help system and machine builders select suitable and approved products.
Both the specifications of FCA and the global standards have been taken into account.
The Festo project manuals for FCA powertrain projects complement the FCA specifications and specify the components that can be used in powertrain projects to build machines and systems.
Project manual for FCA powertrain projects in Europe, Latin America and Asia:
FCA (FCA EMEA, LATAM, APAC) Festo project manual (XLS in English)
FCA (EMEA, LATAM, APAC) Festo cover page (XLS in English)
FCA Festo CPX-VTSA valve terminal configurator (XLS in English)
Example of bypass for assembly stations (PDF in English)
Example of actuating cylinders (PDF in English)
Project manual for FCA powertrain projects in North America (NAFTA):
VW list of approved components for component production
These lists of approved components were created in cooperation with Audi, Skoda and Volkswagen and are based on the up-to-date specifications for mechanical systems for component production of the Volkswagen Group.
List of approved components for mechanical and pneumatic systems (PDF)
List of approved components for electrical systems (PDF)
List of approved components for battery mechanics / battery cell production (PDF)
Click here to download the circuit diagrams for the service modules (see Section 3.6.11 in the list of approved components for mechanical and pneumatic systems):
Circuit diagrams for service units for unit production at Volkswagen (DXF format)
VW list of approved components for BV 1.13 body shop
List of approved components for BV 1.13, including Warehouse 30 body shop (ZIP)
Volkswagen Hanover: service units in the press shop
A number of service units have been defined and approved in collaboration with the press shop at the Volkswagen plant in Hanover.
List of approved components for service units, VW Hanover press shop (PDF)
If you have any questions, please get in touch with your contact person at Festo:
Sebastian Wörner
Ken Kiesewalter
Thorsten Bruns
List of approved components for Volvo Cars AB, Engine Works
Click here for the list of approved components for all Volvo Cars AB, engine plants with links to documentation, CAD data and all other information from the Festo catalogue.
This list of approved components applies to projects at the Skövde and Floby plants and encompasses all products from Festo that are approved for use in Volvo Cars plants in Sweden.
List of approved components for Volvo cars, Skövde plant (PDF in English)
List of approved components for Volvo Cars worldwide
Please contact Festo for the latest lists of approved components for the individual plants.
We created an easy set-up guide for the vacuum generator OVEM:
List of approved components for Volvo Powertrain Sweden
Click here for the list of approved components for all Volvo Powertrain Sweden projects with links to documentation, CAD data and other information from the Festo catalogue.
The list of approved components applies to all Volvo Powertrain Sweden projects and includes all Festo products approved for use at the Volvo Powertrain plants in Sweden.