Title:
DRVS: Replacing wearing parts

Description:
The Festo tutorial is about replacing the wearing parts at the semi-rotary drive DRVS. 00:00 parts list: products and tools 00:13 demounting wearing parts 01:03 mounting wearing parts This video shows the instructions at the following products as an example: - 1845718, semi-rotary drive, DRVS-25-270-P, series 06-2022 - 8173163, set of wearing parts, DRVS-25, series 06-2023 Safety instructions: Before, during and after the work, all guidelines, rules and regulations applicable in your own country must always be observed. Installation (including software), in particular for demonstration purposes, repair and commissioning must only be carried out by qualified, trained and instructed specialist personnel and in ac-cordance with the operating instructions for the products. All installations, maintenance and repair work must only be carried out when switched off. All energy supplies must be permanently interrupted. During the work, some protective equipment might be put out of service. These must be properly reinstalled immediately after completion of the work, put into operation and checked for function! It is imperative that safety instructions and the instructions for handling the product are fully read, understood and adhered to during the work before starting work! When working on the products, the applicable regulations regarding occupational health and safety technology as well as all specifications of the operating instructions and, if applicable, written repair instructions must be observed. If you have any questions or uncertainties, please contact Festo SE & Co. KG directly and do not continue the work until clarification.

Document type:
Video tutorial