Support Portal

Please select a category on the left or use the search.

Search

Part number

Series

Order code

Latest

PA Toolkit 04/11/2026
Supported systems:
  • Control block CPX-CEC-C1-V3 (3473128)
  • Control block CPX-CEC-M1-V3 (3472765)
  • Control block CPX-CEC-S1-V3 (3472425)
  • controller CPX-E-CEC-C1 (5226780)
  • controller CPX-E-CEC-C1-EP (4252742)
  • controller CPX-E-CEC-C1-PN (4252741)
  • controller CPX-E-CEC-M1 (5266781)
  • controller CPX-E-CEC-M1-EP (4252744)
  • controller CPX-E-CEC-M1-PN (4252743)
  • Licence GSPL-CDS-W (8122724)
  • PA-Toolkit MTP Library GSBE-MTP-P-1 (8252574)
  • Terminal CPX (197330)
3.3.0.163
27/10/2026 		Function elementsFile and language versions
Information on substances in our products 22/10/2026 Substances in our products; Compliance

Festo SE & Co KG complies with national and international laws, guidelines, standards and regulations which are applicable to our products. We constantly monitor the dynamics of legislation. This Application Note give an overview.
V3.5
17/10/2026 		Application NoteFile and language versions
Engineering Change Notification 19/10/2026 ECN No. 293980
Engineering change notificationFile and language versions

Top downloads

Terms of use for electronic documentation
Product informationFile and language versions
CANopen in CODESYS V3 CODESYS V3, CPX-FB14, CTEU-CO, CMMP-...-M0/M3, EMCA-CO

This document describes what each CAN parameter in the CODESYS V3 programming environment does, as well as show the available Function Blocks to implement diagnostics or pa-rameterization within the PLC’s Task.

 

 

 
1.10
04/08/2017 		Application NoteFile and language versions
CPX-FB36 in Ethernet/IP Mode with a Schneider M340 CPX-FB36; Schneider M340 PLC; Unit Pro S 13.0

The application node contains a step by step explanation how to

configure and handle a CPX-FB36 in Ethernet/IP mode with a

Schneider M340 PLC and Unit Pro S 13.0
1.10
16/01/2019 		Application NoteFile and language versions
When searching, you can get detailed product information (e.g. CAD support and technical data) with part no. or order code.
If they are not available, use the Product selection in the catalogue.