Support Portal

Please select a category on the left or use the search.

Search

Part number

Series

Order code

Latest

Information on substances in our products 12/08/2026 Substances in our products; Compliance

Festo SE & Co KG complies with national and international laws, guidelines, standards and regulations which are applicable to our products. We constantly monitor the dynamics of legislation. This Application Note give an overview.

V3.3
Declaration of Conformity with EU Regulation 2025/40, Article 5, for Packaging 06/08/2026 PPWR
Simplified Motion Series Control with Schneider PLC through EtherNet/IP Using CPX-AP IO-Link 15/12/2025 SMS Control with Schneider PLC by EtherNet/IP using CPX-AP IO-Link; Library included

This Application Note explains about Simplified Motion Series actuator units (EPCE, EPCS-BS, EGSS, ELGS-BS, ELGS-TB, ELGE, ERMS) IN/OUT Control, Read/Write Parameters & Read Diagnostic Data. Function blocks are tested and released for Festo CPX-AP IO Link Master. Use with other IO-Link Masters not tested and on own responsibility. This library is intended for common use of CPX-AP-I IO Link Master and CPX-AP-A IO Link Master.

1.10
15/10/2024

Top downloads

Welcome to Festo service2see! YouTube channel: Festo Service

On our YouTube channel Festo Service, you will find practical and user-friendly video tutorials on topics that are the subject of frequently asked questions in the areas of maintenance, commissioning and repair.

Simplified Motion Series Control with Festo PLC through Modbus by Festo CPX-AP-I IO-Link Master Simplified Motion Series, Codesys, IO-Link; Library included

This Application Note Explanation about Simplified Motion Series actuator
units (EPCE, EPCS-BS, EGSS, ELGS-BS, ELGS-TB, ELGE, ERMS) actuator
unit IN/OUT Control, Read/Write Parameters & Read Diagnostic Data.

1.40
25/09/2023
Terms of use for electronic documentation
When searching, you can get detailed product information (e.g. CAD support and technical data) with part no. or order code.
If they are not available, use the Product selection in the catalogue.