Clip fix tool AGTCThe clip fix tool AGTC is a pneumatic mounting device for clips of different design. When the clip adapter and clip are mounted and the clip fix tool is pressed against the intended mounting position (hole or bolt), a mounting pulse is triggered in the tool. The clip is fixed in place by the mounting pulse. The level of the set operating pressure determines the strength of the mounting pulse. A specific clip adapter is required for mounting different clips.By pressing the clip fix tool against the clip, the mounting pulse of the device is triggered and the clip is mounted. When the clip is pressed, the drive unit is pushed approx. 7 mm into the housing and the valve is actuated. The valve pressurises the drive unit and the piston accelerates and hits the front end cap of the cylinder. The resulting pulse pushes the clip into the recess provided in the car body.