Air dryer

Learn more about Air dryer
MS series

MS series

For standard applications and application-specific solutions

Optimum product range with the latest functionality

Modular connection system for rapid assembly and disassembly

4 sizes with very high flow rates and minimal dimensions.

D series, metal design

D series, metal design

Ideal for all standard applications

All basic functions for compressed air preparation

Sturdy connection technology


Individual devices

Individual devices

End position dryer for lowest pressure dew points (-40°C/-70°C)

Use as individual component in air supply lines

Flow range to 2400 l/min.

Selection guide

Selection Guide

Compressed air dryers

MS seriesThe membrane air dryers MS-LDM are optimal end position dryers with high operational reliability for a reduction of the pressure dew point by 20 K. They are characterised by their dew point reduction which is independent of the flow rate and their wear-free operation. The purge air can optionally be discharged via a ring and amounts to 15% of the total flow rate. They are available in the two most common sizes MS4 and MS6.They are suitable for use as individual devices and can be integrated in service units via the simple modular system of the MS series.They can optionally also be configured for use in the potentially explosive areas of zones 1, 2, 21 and 22 as well as with UL approval.
D series, metalThe membrane air dryers LDM of the D series work according to the same functional principle as the MS-LDM with the same reliability. The pressure dew point reduction is between 17 and 20 K, depending on the selection.The purge air is 15-20% of the total flow, depending on the configuration. They are available in size D-MAXI and are suitable for use as individual devices and can be integrated in service units using the tie rod connection system of the D series.
Individual dryer devicesThe adsorption dryer series PDAD is used whenever a pressure dew point of below -20 °C to -70 °C is required. It is ideal for decentralised compressed air drying. Adsorption dryers have two cartridges filled with drying agent. Moist compressed air flows alternately through each of the two cartridges, with the water accumulating on the surface of the drying agent. After a specified time, the air flow is switched to the other cartridge and part of the dried air (purge air) is used to regenerate the drying agent in the first cartridge.The adsorption dryers PDAD are suitable for use as individual devices and can be integrated in service units of the MS series using the simple modular system of the MS series.