Look for the star when selecting products in the catalogue.
For more than 2,200 products worldwide: always in stock, attractively priced and delivered quickly
For example, you can start with the basic level in electrohydraulics and expand this package with the advanced level, or you can move from the basic level in hydraulics to mobile hydraulics – the choice is yours! Our training packages are modular. Would you like to train on a specific group of topics? Go for it! Order all equipment set components individually to put your own ideas into practice.
Overview and structure of our hydraulics training packages
Basic hydraulics training
A solid foundation for practical basic and further training. Training package TP 501 only covers hydraulic control systems.
Hydraulics for advanced users
Training package TP 502 builds directly on the training content covered in the basic package TP 501 and then adds an extra 15 projects.
The components and necessary accessories from equipment set TP 501 are required to complete the projects.
Realistic!
Advanced equipment set TP 501+ covers systematic troubleshooting in hydraulics and is offered as an extension to equipment set TP 501. TP 501+ contains components with predefined, realistic errors. Set up hydraulic circuits with TP 501 and replace individual components with defective ones.
Basic training in electrohydraulics
This training package covers the basic physical principles of electrical engineering and electrohydraulics, as well as the functions and use of electrohydraulic and control technology components.
Electrohydraulics for advanced users
This training package builds directly on the training content of the basic package TP 601 and adds more in-depth projects to it.
The components and the necessary accessories from TP 601 are required in order to complete the projects.
Measurement and control with FluidLab®-H
Fit for tomorrow?
This advanced level extends the training packages TP 501 and TP 601 to include measurement and control.
You will need TP 501 and TP 601 to complete the exercises.
Basic training for closed-loop hydraulics
Hydraulic closed-loop control circuits are normally operated with continuous valves. A control valve with integrated electronics, linear characteristic curve (volumetric flow rate relative to piston position) and zero overlap makes commissioning easy and provides good results in the control circuit.
Basic proportional hydraulics training
Proportional valves are continuous valves that, thanks to the use of proportional solenoids, not only permit simple switching positions, but also allow infinitely variable valve opening adjustment.
Challenging further training in proportional hydraulics
Training package TP 702 builds directly on the training content covered in basic package TP 701 and expands it with nine in-depth practical problems.
Mobile hydraulics – Working hydraulics 1, Basic level, TP 801
Mobile hydraulics has a range of specific features compared to conventional industrial hydraulics. The training content is therefore usually explained and demonstrated directly on the vehicle. But what if the hydraulic components being explained or the vehicle are not accessible or the entire system is too complex for teaching purposes?
Our training system for mobile hydraulics closes the gap between the basic principles of hydraulics and complete hydraulic systems in vehicles.
Mobile hydraulics – Hydrostatic steering system, Advanced level, TP 802
As with all our training packages, mobile hydraulics, too, is designed so that all components can be used as a complete and compatible system. This means that many elements of the basic level can also be used for experiments at advanced levels. The components and accessories from the equipment set TP 801 are required to carry out the projects.
Mobile hydraulics – Working hydraulics 2, Advanced level, TP 803
The advanced level focuses on the load-sensing system with variable displacement pump, control block, pilot control and up to two consumers.
Components and accessories from the equipment sets TP 801 and TP 802 are required to carry out the projects.
Measure, visualise and analyse with our diagnostic system FluidLab®-M.
Supplementary equipment set to upgrade from Hydraulics, Basic level, TP 501 to Electrohydraulics, Basic level, TP 601
Supplementary equipment sets are an economical way of expanding a basic level training package by including the topics of another basic level.
Supplementary equipment set to upgrade from Hydraulics TP 501 and TP 502 to Electrohydraulics, Basic level, TP 601
Supplementary equipment sets are an economical way of expanding a basic level training package by including the topics of another basic level.
Supplementary equipment set to upgrade from Hydraulics, Basic level, TP 501 to Mobile Hydraulics – Working Hydraulics 1, TP 801
Supplementary equipment sets are an economical way of expanding a basic level training package by including the topics of another basic level.
Supplementary equipment set: control with LOGO! 8 TP EduTrainer®Compact TP
A quick, uncomplicated and inexpensive introduction to logical signal processing. This package includes everything you need to implement training packages 201 or 601.
Supplementary equipment set Control with FluidSIM®/EasyPort USB
With this package, you use the software FluidSIM®to implement the training packages. FluidSIM®controls and processes the inputs and outputs at the universal connection unit via EasyPort USB in line with your programming, for example through the digital module included in FluidSIM®.
The supplementary equipment set for Controlling with FluidSIM® includes everything you need to implement training packages TP 201 and TP 601. FluidSIM®pneumatics for TP 201 or FluidSIM®hydraulics for TP 601 are a prerequisite.
Our free for automation technologyTo the online dictionary
On the following pages you will find the symbolsfor our products. The symbols conform to ISO 1219, part 1 and EN 60617, parts 2 to 13.
The Festo Didactic InfoPortal provides you with support and technical information about our learning systems. This information includes details about how to set up, commission and operate the learning systems.
Festo Learning Experience is the online portal for learners and teachers to access and create customized learning experiences.
It features didactic learning resources for many technical fields. Our modular concept provides learning content in small nuggets and gives you the opportunity to modify existing courses to your needs and easily add new content with our integrated WebEditor function. Providing all necessary tools to create engaging lessons, it helps educators to access and build industry-aligned content easier and quicker.
