Support Portal

Please select a category on the left or use the search.

Search

Part number

Series

Order code

Description
Technology for education and science
Technology for education and science The current range of Festo Didactic products
Sensors - Vision systems
Sensors - Vision systems Complete program of all sensors and vision systems

Proximity sensors, position sensors, signal converters, pressure and vacuum sensors, flow sensors, inductive sensors, opto-electronic sensors, air gap sensors, sensor boxes, vision systems for function monitoring,orientation and quality inspection; connecting cables, plug connectors, sensor testers

Electrical engineering and Electronics – Everything from a single source
Electrical engineering and Electronics – Everything from a single source

Equipment for electrical engineering laboratories

 

Regardless of the control and drive technology used, electrical engineering always plays a role.

 

No matter what your training focuses on, electrical engineering and electronics are part of the basic knowledge for all areas of production, process and automation technology.

 

With learning systems from Festo Didactic, learning laboratories – be they modular, customised or complete – can be equipped for any application and budget, whether for industry or trades, for teaching basic principles, for building systems or control or drive technology.

Safety engineering guidelines
Safety engineering guidelines Pneumatic and electric solutions
Automation Technology
Automation Technology Pneumatic and electrical components
  • Pneumatic drives
  • Servopneumatic positioning systems
  • Electromechanical drives
  • Motors and controllers
  • Grippers
  • Handling systems
  • Vacuum technology
  • Valves
  • Valve terminals
  • Sensors
  • Image processing systems
  • Compressed air preparation
  • Pneumatic connection technology
  • Electrical connection technology
  • Control technology and software
  • Other pneumatic devices
  • Ready-to-install solutions
  • Services
Electronics and Electrical Engineering
Electronics and Electrical Engineering Learning solutions for basic and advanced training

The guide includes both CE and non-CE products (from the LabVolt Series).

Teciam
Teciam

The abbreviation Teciam stands for Training and Excellence Centre in Industrial Automation and Mechatronics. The Teciam conceptualisation on hand describes a holistic concept and approach in overcoming all difficulties putting an industrial orientated training centre from baseline on firm footing.

New-found training vitality
New-found training vitality Training packages for electrical engineering and electronics
  • In particular those who are well trained have the best chances at finding interesting jobs.
  • Successful training is enjoyed by those who attend a well equipped school and are trained at a highly committed company.
  • Greatest learning success prevails when trainers and teachers are highly qualified, laboratories are suitably equipped, and training devices and media are well matched to each other.
  • The layout of the training laboratory is most successful when mutual planning is taken advantage of, and everything is supplied from a single source.


Logical consequence:
training concepts, equipment and learning systems from A to Z from a single source, namely Festo Didactic.

Schematic Solution for EPLAN projects
Schematic Solution for EPLAN projects A real time saver!

This circuit diagram service for complete EPLAN projects is unique to Festo. Schematic Solution for EPLAN projects documents your configured solutions in next to no time! Simply enter your order code and receive the complete plan in just a few minutes – error-free and trouble-free. No more tedious searching for, downloading and piecing together individual components.

Factory Automation:
Factory Automation: Learning systems and services for basic and further training

Today’s advanced manufacturing industry relies heavily on mechatronics and automation technologies, making these technologies fast-growing career fields.

Your contact person to the Automotive Industry worldwide
Your contact person to the Automotive Industry worldwide
Services and support for maximum added value
Services and support for maximum added value Worldwide, competent, to the point

Benefit globally from faster processes, lower costs and maximum reliability - thanks to our first-class products and comprehensive range of services and support, from engineering to operation and modernisation.

The SLS-generated Soft Robotic Hand
The SLS-generated Soft Robotic Hand An Integrated Approach using Additive Manufacturing and Reinforcement Learning

To develop
a robotic system for a complex task
is a time- consuming process. Merging
methods available today, a new ap- proach for a faster realization of a multi-finger soft robotic hand is presented here. This
paper introduces a robotic hand with four fingers and 12 Degrees of Freedom
(DoFs) using bellow actuators. The hand is generated via Selective
Laser Sintering (SLS), an Additive Manufacturing method. The complex task execution of a specific action,
i.e. the lifting, rotating and precise positioning of a handling- object with this robotic hand, is used to structure
the whole develop- ment process. To
validate reliable functionality of the hand from the beginning, each development
stage is SLS-generated and the targeted task execution is trained
via Reinforcement Learning, a machine learning approach.
Optimization points are subsequently derived
and fed back into the hardware development. With this Concurrent
Engineering strategy a fast development of this robotic
hand is possible. The paper
outlines the relevant key strategies and gives insight into
the design process. At the end, the
final hand with its capabilities is presented and discussed.

Decentralised control concepts
Decentralised control concepts

Installation and control concepts are influencing each other more than ever before, especially as we move towards Industry 4.0 and the Internet of Things (IoT). It is only through effective interaction between these architectures that modular, flexible and adaptable production concepts with decentralised intelligence, pre-processing, autonomous machines or subsystems, cyber-physical systems – in other words, smart factories – will be successful.

Selected products. Your partner for factory and process automation
Selected products. Your partner for factory and process automation
Inventing a Micro Aerial Vehicle inspired by the mechanics of dragonfly flight
Inventing a Micro Aerial Vehicle inspired by the mechanics of dragonfly flight BionicOpter

Dragonfly flight is unique: Dragonflies can manoeuvre in all directions, glide without having to beat their wings and hover in the air. Their ability to move each of their four wings independently ena- bles them to slow down and turn abruptly, to accelerate swiftly and even to fly backwards. We looked into the mechanics of the dragonfly flight and managed to transfer its flight dynamics into an ultralight flying object: the Bionicüpter. With a wingspan of 63 cm and a body length of 44 cm, the model dragonfly weighs just 175 g. A brushless motor actuates the four wings and is used to alter the flapping fre- quency. Eight servo motors allow the amplitude and the twisting angle of each wing to be changed independently making the Bionicüpter almost as agile and fast as its natural role model. Here we present

how dragonfly flight dynamics can inspire future design of MAVs.

Product Overview
Product Overview
Process automation, Closed-loop control technology, EDS® – Environmental Discovery System
Process automation, Closed-loop control technology, EDS® – Environmental Discovery System Learning systems and services for basic and further training
Highlights 2019
Highlights 2019 Digitalisation – the key to increased productivity

With this issue of Highlights 2019, you are holding a kind of compass

in your hand. It will show you where the path with Festo might take

you this year.

You will see the first results in our core product range. Numerous new

components like the mini slide DGST or the compact cylinder ADN-S

are useful additions to the portfolio.

A central theme for us is connectivity at all possible levels:

mechanical, electrical and software.

When the chemistry is right, so is the physics.
When the chemistry is right, so is the physics. Or: How the close cooperation between Boehringer Ingelheim and Festo brought about an exceptional solution in processautomation. This is that story.
Product Overview Cleanroom
Product Overview Cleanroom Series products for the clean room
  • Tested to VDI 2083-9.1
  • Classified to ISO 14644
Industry 4.0
Industry 4.0
Product Service Life at Festo
Product Service Life at Festo Survival training for products from Festo – quality that ensures a long service life
Handling systems
Handling systems The whole range: standard, compact, highly dynamic and application specific

Festo offers you a diverse range of handling systems for a multitude of applications, from standard solutions for common applications through

to customised solutions. In addition, our ready-to-install systems, software and support services mean less work for you. We support you from the design stage through to installation and commissioning.

Handling systems and Handling Guide Online
Handling systems and Handling Guide Online Three steps to your handling system

Festo offers you a diverse range of handling systems for a multitude of applications. With the online tool "Handling Guide Online", you can configure and order your standard handling system in record time.

performance
performance Company profile

Information about Festo in general

 

Facts and figures

 

 

 

Maximum productivity: Terminal CPX
Maximum productivity: Terminal CPX
생산성의 극대화 : 통합 자동화 플랫폼 CPX
생산성의 극대화 : 통합 자동화 플랫폼 CPX
One-way flow control valves and functional combinations
One-way flow control valves and functional combinations
Safely on the way in the automotive and Tier 1 supplier industry
Safely on the way in the automotive and Tier 1 supplier industry Reach your destination of maximum machine availability and machine safety – without detours and safely.
Show 30 more results ...
Subscribe to RSS
When searching, you can get detailed product information (e.g. CAD support and technical data) with part no. or order code.
If they are not available, use the Product selection in the catalogue.