Support Portal

Please select a category on the left or use the search.

Search

Part number

Series

Order code

Description Version
Mass moment of inertia
Mass moment of inertia

Juggling pencils and calculators is now a thing of the past. Whether discs, cuboids, push-on flanges, grippers, etc: this tool does the job of calculating all mass moments of inertia for you. Just save, send or print – and you’re finished.

Valve Control Module VAEM API
1.2.2.0
19.08.2020
Valve Control Module VAEM Firmware
1.2.3.0
19.08.2020
Valve Control Module VAEM GUI
1.2.1.0
19.08.2020
AirCon
AirCon Air requirements for pneumatically actuated valves

Compressed air requirements for pneumatically actuated valves in water treatment plants can be calculated with Aircon. Beyond this, required compressed air reservoir capacity can be ascertained, and valves can be automatically configured for use with Festo actuators.

PositioningDrives
PositioningDrives Electromechanic linear actuators

Dimensioning of electromechanic linear axes and electrical motors: Find a solution with only a few basic data

Version 2.3.34
23.07.2020
Quick Search Plus
Quick Search Plus Adds the plus to Quick Search

Plus Tidy user interface with zoom

Plus Just a single search box for part no., type and ID code

Plus Built in match code search

Plus Live ID code search

Plus Standard product range indication

Plus Multi select products for compare, add to basket or copy to clipboard

Plus Accessories next to the product

 

Requires Windows7 or higher + a fast internet connection

2020.07
18.07.2020
Festo CAD plugin for Solid Edge Assure a reliable link between the Festo PARTdataManager and your Solid Edge.

A Festo menu is added to your CAD system, by means of which part selection is seamlessly integrated.

 

Advantages:

• Much faster component modelling with matings

• No additinal application is needed

• Use of your own system templates

• Individualised configuration of interface settings

 

PARTdataManager version: supported CAD system versions:

 

2020:    Solid Edge ST6 - ST9 und 2019 - 2020

2019:    Solid Edge ST6 - ST9 und 2019

2018:    Solid Edge ST7 - ST9

2017-1: Solid Edge ST4 - ST8 

2017-2: Solid Edge ST9

 

 Please note: Festo PARTdataManager has to be installed.

2020 (V11 SP8)
01.01.2020
FCT - Festo Configuration Tool - PlugIn Configuration and commissioning software for the motor controller CMMP-AS

Version history:

  • FCT Plugin CMMP-AS V2.14.1.11 for Firmware V4.0.1501.2.4
  • FCT Plugin CMMP-AS V2.13.1.1 for Firmware V4.0.1501.2.4
  • FCT Plugin CMMP-AS V2.12.0.174 for Firmware V4.0.1501.2.4
  • FCT Plugin CMMP-AS V2.10.0.150 for Firmware V4.0.1501.2.4
  • FCT Plugin CMMP-AS V2.9.0.255 for Firmware V4.0.1501.2.4
  • FCT Plugin CMMP-AS V2.8.0.554 for Firmware V4.0.1501.2.3
  • FCT Plugin CMMP-AS V2.7.0.154 for Firmware V4.0.1501.2.3
  • Festo Configuration Tool V1.4.2.1



Supported systems:

  • Motor controller CMMP-AS-C10-11A-P3-M3 (1501328)
  • Motor controller CMMP-AS-C10-11A-P3-M3-C1 (2106335)
  • Motor controller CMMP-AS-C15-11A-P3-M3 (3215473)
  • Motor controller CMMP-AS-C2-3A-M3 (1501325)
  • Motor controller CMMP-AS-C2-3A-M3-C1 (2106332)
  • Motor controller CMMP-AS-C5-11A-P3-M3 (1501327)
  • Motor controller CMMP-AS-C5-11A-P3-M3-C1 (2106334)
  • Motor controller CMMP-AS-C5-3A-M3 (1501326)
  • Motor controller CMMP-AS-C5-3A-M3-C1 (2106333)
2.14.1.11
27.03.2020
FCT - Festo Configuration Tool - PlugIn Configuration and commissioning software for the motor controller CMMO-ST

Version history:

  • FCT Plugin CMMO-ST V1.11.0.23
  • FCT Plugin CMMO-ST V1.10.0.112
  • FCT Plugin CMMO-ST V1.9.0.176
  • FCT Plugin CMMO-ST V1.8.0.274
  • FCT Plugin CMMO-ST V1.7.0.168
  • FCT Plugin CMMO-ST V1.6.0.162
  • FCT Plugin CMMO-ST V1.5.2.1
  • FCT Plugin CMMO-ST V1.4.0.303
  • Festo Configuration Tool V1.4.2.1



Supported systems:

  • Motor controller CMMO-ST-C5-1-DIOP (1512316)
1.11.0.23
27.03.2020
FCT - Festo Configuration Tool Configuration and commissioning software for the motor controller CMMS-ST

Version history:

  • FCT Plugin CMMS-ST V2.7.0.24
  • FCT Plugin CMMS-ST V2.6.0.117
  • FCT Plugin CMMS-ST V2.5.0.177
  • FCT Plugin CMMS-ST V2.4.0.234
  • FCT Plugin CMMS-ST V2.3.0.113
  • FCT Plugin CMMS-ST V2.2.0.180
  • FCT Plugin CMMS-ST V2.1.0.622
  • FCT Plugin CMMS-ST V2.0.1.28
  • Festo Configuration Tool V1.4.2.1



Supported systems:

  • Motor controller CMMS-ST-C8-7-G2 (572211)
2.7.0.24
27.03.2020
FCT - Festo Configuration Tool - PlugIn Configuration and commissioning software for the integrated drive EMCA-EC-67-...

Version history:

  • FCT Plugin EMCA V1.8.0.24
  • FCT Plugin EMCA V1.7.0.123
  • FCT Plugin EMCA V1.6.0.148
  • FCT Plugin EMCA V1.5.0.137
  • FCT Plugin EMCA V1.4.0.96
  • FCT Plugin EMCA V1.3.0.256
  • FCT Plugin EMCA V1.2.0.136
  • FCT Plugin EMCA V1.1.1.1
  • Festo Configuration Tool V1.4.2.1



Supported systems:

  • integrated drive EMCA-EC-67- (1509036)
  • integrated drive EMCA-EC-67-M-1TE-CO (8034239)
  • integrated drive EMCA-EC-67-M-1TM-CO (8034241)
  • integrated drive EMCA-EC-67-S-1TE-CO (8034238)
  • integrated drive EMCA-EC-67-S-1TM-CO (8034240)
1.8.0.24
27.03.2020
Pneumatic drives
Pneumatic drives

Perfect simulations replace expensive reality tests. GSED is an expert system that helps you select and configure the entire pneumatic control sequence. If an entered variable is changed, the program automatically adopts it for all further values.

Festo CAD plugin for Autodesk Inventor Assure a reliable link between the Festo PARTdataManager and your Inventor.

A Festo menu is added to your CAD system, by means of which part selection is seamlessly integrated.

 

Advantages:

• Much faster component modelling with matings

• No additinal application is needed

• Use of your own system templates

• Individualised configuration of interface settings

 

PARTdataManager version: supported CAD system versions:

2020: Autodesk Inventor 2014 - 2020

2019: Autodesk Inventor 2014 - 2019

2018: Autodesk Inventor 2014 - 2018

2017: Autodesk Inventor 2011 - 2017

 

Please not: Festo PARTdataManager has to be installed.

2020 (V11.00 SP8)
01.01.2020
Festo CAD plugin for NX Assure a reliable link between the Festo PARTdataManager and your NX.

A Festo menu is added to your CAD system, by means of which part selection is seamlessly integrated.

 

Advantages:

• Much faster component modelling including matings

• No additinal application is needed

• Use of your own system templates

• Individualised configuration of interface settings

 

PARTdataManager version: supported CAD system versions:

2020: NX 8.0 - 12.0 sowie 1847, 1872

2019: NX 8.0 - 12.0

2018: NX 8.0 - 11.0

2017: NX 7.5 - 11.0

 

Please note: Festo PARTdataManager has to be installed.

2020 (V11.00 SP8)
01.01.2020
Festo CAD-Plugin for Pro/Engineer and Creo Parametric Assure a reliable link between the Festo PARTdataManager and your CAD system.


Advantages:

• Much faster component modelling with matings

• No additinal application is needed

• Use of your own system templates

• Individualised configuration of interface settings

 

Please note: Festo PARTdataManager has to be installed.

 

PARTdataManger version: supported CAD system versions:

 

2020:

    • Pro/Engineer WF5

    • Creo Parametric 1 - 6

 

2019:

    • Pro/Engineer WF5

    • Creo Parametric 1 - 5

 

2018:

    • Pro/Engineer WF5

    • Creo Parametric 1 - 4

 

2017:

    • Pro/Engineer WF5

    • Creo Parametric 1 - 3

2020 (V11 SP8)
01.12.2019
Festo CAD plugin for SolidWorks 2012-2020 Assure a reliable link between the Festo PARTdataManager and your SolidWorks.

A Festo menu is added to your CAD system, by means of which part selection is seamlessly integrated.

 

Advantages:

• Much faster component modelling with matings

• No additinal application is needed

• Use of your own system templates

• Individualised configuration of interface settings

 

PARTdataManager version: supported CAD system versions:

 

2020-1: SolidWorks 2014 - 2019 and 2020

2019:    SolidWorks 2014 - 2018

2018:    SolidWorks 2012 - 2017

 

For the respective PARTdataManager version 2020 the CAD interface for SolidWorks 2020 is available as a separate setup.

 

Please note: Festo PARTdataManager has to be installed.

2020 (SWX 2014-2020)
01.01.2020
Festo CAD plugin Update for SolidWorks 2020 Assure a reliable link between the Festo PARTdataManager and your SolidWorks.

Update for PARTdataManager 2020 for SolidWorks 2020.

 

A Festo menu is added to your CAD system, by means of which part selection is seamlessly integrated.
 
Advantages:
• Much faster component modelling with matings
• No additinal application is needed
• Use of your own system templates
• Individualised configuration of interface settings

 

Please note: Festo PARTdataManager 2020 has to be installed.

 

For the PARTdataManager version 2020 the CAD interfaces for the corresponding SolidWorks versions 2014-2019 are available in a separate setup that can be downloaded here in the Support Portal:
 
2020-1: SoldWorks 2014-2019

2020 (V11.00 swx 2020)
01.01.2020
Festo CAD plugin for AutoDesk AutoCAD Assure a reliable link between the Festo PARTdataManager and your AutoCAD.

A Festo menu is added to your CAD system, by means of which part selection is seamlessly integrated.

 

Advantages:

• Much faster component modelling with matings

• No additinal application is needed

• Use of your own system templates

• Individualised configuration of interface settings

 

PARTdataManager version: supported CAD system versions:

2020: Autodesk AutoCAD 2014 - 2020

2019: Autodesk AutoCAD 2014 - 2019

2018: Autodesk AutoCAD 2014 - 2018

2017: Autodesk AutoCAD 2011 - 2017

 

Please not: Festo PARTdataManager has to be installed.

2020 (V11 SP8)
01.01.2020
Target Support Package CODESYS

Supported systems:

  • automation system CPX-E (5237644)
  • controller CPX-E-CEC-C1 (5226780)
  • controller CPX-E-CEC-C1-EP (4252742)
  • controller CPX-E-CEC-C1-PN (4252741)
  • controller CPX-E-CEC-M1 (5266781)
  • controller CPX-E-CEC-M1-EP (4252744)
  • controller CPX-E-CEC-M1-PN (4252743)
3.5.12.75
24.10.2018
Festo PARTdataManager
Festo PARTdataManager Reduced workload - thanks to 2D/3D CAD data for more than 33,000 products

Festo PARTdataManager can be installed as a separate application.

Take advantage of comprehensive full-text searches, e.g. for part numbers, product lines or designation as well as functions like geometrical product comparison and geometrical search based on an imported 3D file.

 

2D/3D CAD interfaces for:

• AutoCAD

• Autodesk Inventor™

• CATIA V5

• Pro/ENGINEER

• NX™

• SOLID EDGE

• SolidWorks

2020 (V11.00 SP8 Build 185135)
01.01.2020
Process Valve Automation Tool (PVA-Tool)
Process Valve Automation Tool (PVA-Tool) User friendly software for dimensioning and selection of the suitable quarter turn actuator for automation of butterfly and ball valves

The torque diagrams of the selected actuator will be displayed for a visual confirmation. The application parameters can be changed any time and consequently the results will be automatically adapted to the new requirements.

1.1.4
21.01.2020
EPLAN Daten via QuickSearch
EPLAN Daten via QuickSearch Simple and fast access to EPLAN data

Within the QuickSearch werden im Menü >>CAD<< Einträge für EPLAN hinzugefügt:

- EPLAN Data Portal

- EPLAN DXF Download

- EPLAN Basket

 

This provides fast and easy access to EPLAN data for Festo products. In particular, the option of transferring a product or a complete project list to the EPLAN basket by one click is a great help and time saver.

2019.07
01.07.2019
Target Support Package CODESYS CPX-CEC Package for CODESYS V3.5 SP12 Patch6 pbF

Supported systems:

  • Control block CPX-CEC-C1-V3 (3473128)
  • Control block CPX-CEC-M1-V3 (3472765)
  • Control block CPX-CEC-S1-V3 (3472425)
3.5.12.174
06.08.2019
Firmware Bootloader compatible with Codesys pdF 3.5 SP12 Patch 6

Supported systems:

  • Control block CPX-CEC-C1-V3 (3473128)
  • Control block CPX-CEC-M1-V3 (3472765)
  • Control block CPX-CEC-S1-V3 (3472425)
3.0.8
05.06.2019
Firmware Firmware compatible with Codesys pdF 3.5 SP12 Patch 6

Supported systems:

  • Control block CPX-CEC-C1-V3 (3473128)
  • Control block CPX-CEC-M1-V3 (3472765)
  • Control block CPX-CEC-S1-V3 (3472425)
3.0.8
05.06.2019
FMT - Festo Maintenance Tool

The CPX-FMT is a helpful tool for commissioning, configuration and extended diagnosis of a CPX valve terminal. If Industrial Ethernet fieldbus nodes like Ethernet/IP, ProfiNet and Modbus/TCP are used, CPX-FMT can directly communicate with the CPX terminal via Ethernet connection. In the case of conventional fieldbuses, the software can be connected to the CPX terminal by means of a USB adapter (type NEFC-M12G5-0.3-U1G5).

Supported systems:

  • Adapter NEFC-M12G5-0.3-U1G5 (547432)
  • Bus node CPX-FB11 (526172)
  • Bus node CPX-FB13 (195740)
  • Bus node CPX-FB14 (526174)
  • Bus node CPX-FB23-24 (526176)
  • Bus node CPX-FB32 (541302)
  • Bus node CPX-FB33 (548755)
  • Bus node CPX-FB36 (1912451)
  • Bus node CPX-FB38 (552046)
  • Bus node CPX-FB6 (195748)
  • Bus node CPX-M-FB20 (572334)
  • Bus node CPX-M-FB21 (572221)
  • Bus node CPX-M-FB34 (548751)
  • Bus node CPX-M-FB35 (548749)
  • Control block CPX-CEC (567346)
  • Control block CPX-FEC-1-IE (529041)
  • Terminal CPX (197330)
  • Valve terminal MPA-FB-VI (530411)
  • Valve terminal MPAF-FB-VI (544397)
  • Valve terminal MPAL-VI (569926)
  • Valve terminal VTSA-FB (539217)
  • Valve terminal VTSA-FB-NPT (539218)
  • Valve terminal VTSA-F-FB (547965)
  • Valve terminal VTSA-F-FB-NPT (547966)
4.21.210
11.03.2019
Function blocks CODESYS

Supported systems:

  • controller CECC-D (574415)
37
19.03.2019
Festo Automation Suite Update Container - only for integrated update mechanism

The update container is used by the Festo Automation Suite for its integrated online update mechanism and cannot be installed manually. Please download and install the regular setup file if you want to update an installation on a computer without internet access.

1.1.1.610
16.01.2019
Festo Automation Suite - Extension Network scan - only for integrated update mechanism

The extension is already included in the setup of the Festo Automation Suite and does not need to be downloaded and installed separately.

1.1.0.259
16.01.2019
Show 30 more results ...
Subscribe to RSS