Support Portal

Please select a category on the left or use the search.

Search

Part number

Series

Order code

Description
EMMS-AS
EMMS-AS
EMMS-AS servo motors and CMMP-AS motor controllers with extended functionality
EMMS-AS servo motors and CMMP-AS motor controllers with extended functionality
Servomotors EMM_-AS
Servomotors EMM_-AS use of radial shaft sealing rings

Application note on the use of radial shaft sealing rings

Intelligent vision system finds its own test position!
Intelligent vision system finds its own test position! Intelligente Kamera findet Prüfposition selbst!

Fast, cost-effective and versatile: The intelligent vision system SBOI-Q controls an electrical handling unit via an integrated PLC. The system analyzes an image against reference data and uses this to calculate the correct positions for the X and Z axes of the handling unit. There is no need for an additional controller, which makes the installation as a whole less complex.

Servo press kit YJKP for electric press-fitting applications
Servo press kit YJKP for electric press-fitting applications D-EL1404

The right press for every application: the modular servo press kit YJKP gives you just the software functions you need for your application. Apart from the modular operating software, the kit includes the electric spindle drive, the motor, the motor controller, the force sensor and the control system. Everything perfectly coordinated and from a single source –

for electrical press-fi tting applications of up to 17 KN.

EMME-AS
EMME-AS
Stepper motors EMMS-ST/ motor controller CMMS-ST
Stepper motors EMMS-ST/ motor controller CMMS-ST
DMM/EMM
DMM/EMM
EMMS-ST
EMMS-ST
BionicTripod with FinGripper
BionicTripod with FinGripper Flexible tripod with adaptive gripper - Energy-efficient movement and form-fit gripping
Pick and Place – P+K Maschinen- und Anlagenbau GmbH
Pick and Place – P+K Maschinen- und Anlagenbau GmbH Article from customer magazine 1.2014

Power out of the box:

Quality testing of bipolar plates for fuel cells

Axial kits EAMM-A
Axial kits EAMM-A
Your route to the right handling system (overview)
Your route to the right handling system (overview) The right handling system in just minutes - with the Handling Guide Online

Configure and order your standard handling system in record time with the new online tool "Handling Guide Online".

Selective soldering – IPTE Factory Automation
Selective soldering – IPTE Factory Automation Brief application example

System for selective soldering of sensors directly in the protective housing

HGO_Mindjogger_Americas_EN
HGO_Mindjogger_Americas_EN
Parallel kits EAMM-U
Parallel kits EAMM-U
Electric rotary drive module ERMB
Electric rotary drive module ERMB
Pick and Place
Pick and Place Brief application example

Sample application

Pressing
Pressing Brief application example

Sample application

Electric automation
Electric automation Product selection overview
Keeping biotechnology under control - safe, reliable and transparent 2010, 1.47 min
 
Electric pressing application Video, 2014, 1.53 min, EN MP4 HD

Cartridge press-fitting machine

CyberKite
CyberKite Autonomous kite
Cell assembly
Cell assembly D-EL1401

Battery cells in pouch design are picked from a conveyor belt and placed in a module carrier. The module assembly station combines the individual battery cells to form a battery sub-module. In order to compensate for the expansion which occurs during battery operation, the battery cells (pouch cells) are held centrally in the clamping frame by their fold. The cell is pre-centred by the electric parallel gripper and then gripped over a large area with the vacuum gripper. The sequence is insertion of clamping frame, insertion of pouch cell, insertion of clamp frame. The picture does not show the clamping of the clamping frame.

joining and press-fitting solutions
joining and press-fitting solutions Electric and pneumatic joining and press-fitting

Joining and press-fitting are key processes in the production of goods, and an important area in factory automation. That is why we are now also offering self-contained systems in this field. We have many years of experience as a partner in the design and production of handling systems and drive solutions as well as expertise in processes. This enables us to offer exactly the right solution for your joining and press-fitting application

Electric cylinders DNCE, with spindle drive
Electric cylinders DNCE, with spindle drive
Scania CV Specification
Scania CV Specification Body Shop Oskarshamn (SE), Sau Paulo (BR)

Release list for all components to Scania projects with links to documents,

CAD data and other information from the Festo catalogue.

Purchasing guidelines 2017/2018
Purchasing guidelines 2017/2018
Optimised Motion Series
Optimised Motion Series Electric cylinder EPCO and motor controller CMMO-ST

Optimised Motion Series – the system: low-cost with optimised performance.

A package that makes positioning easier than ever before – and significantly less expensive than conventional electric positioning systems. Electric cylinder EPCO with stepper motor EMMS-ST – simple like a pneumatic cylinder but with the advantages of electric drives and motor controller CMMO-ST in the ServoLite.

Show 30 more results ...
Subscribe to RSS
When searching, you can get detailed product information (e.g. CAD support and technical data) with part no. or order code.
If they are not available, use the Product selection in the catalogue.