Portál podpory

Zvoľte prosím kategóriu na ľavej strane alebo použite funkciu vyhľadávania.

Vyhľadávanie

Objednávacie číslo

Séria

Objednávací kód

Popis
From industry – for industry: CP Factory/Lab Training – Basics of secure networking in an industrial environment
From industry – for industry: CP Factory/Lab Training – Basics of secure networking in an industrial environment DT551

Festo Training and Consulting

From industry – for industry: CP Factory/Lab Training – Working with MES4
From industry – for industry: CP Factory/Lab Training – Working with MES4 DT231

Festo Training and Consulting

From industry – for industry: Basics of Product Identification at the CP Factory/Lab
From industry – for industry: Basics of Product Identification at the CP Factory/Lab DT221

Festo Training and Consulting

From industry – for industry: Practical Introduction to Machine Learning with Neural Nets in Industrial Environments
From industry – for industry: Practical Introduction to Machine Learning with Neural Nets in Industrial Environments

Festo Training and Consulting

 

From industry – for industry: Lean Management and Industry 4.0 – Two complementary approaches
From industry – for industry: Lean Management and Industry 4.0 – Two complementary approaches TCM271

Training and Consulting

Lean and Industry 4.0 are two philosophies which have similar targets. With a higher number of customer specific products and decreasing lot sizes, the Lean philosophy reaches its limits. Industry 4.0 offers an opportunity to support the existing Lean methods. As digitalization is raising new kinds of waste (especially in the area of data), new forms of analyzing value streams are gaining in importance. With an adaption of a typical value stream analysis, it is possible to identify these new kinds of waste and learn how to avoid them.

From industry – for industry: Smart Maintenance at the CP Factory/CP Lab
From industry – for industry: Smart Maintenance at the CP Factory/CP Lab DT261

Training and Consulting

This training provides information about how to use big data in maintenance and illustrates how to use condition monitoring. As a result, smart maintenance strategies and measures are understood and can be applied.

From industry – for industry: Introduction to Industry 4.0 with MPS® 203 I4.0 or MPS®TS Compact Trainer I4.0
From industry – for industry: Introduction to Industry 4.0 with MPS® 203 I4.0 or MPS®TS Compact Trainer I4.0 TCM221

Training and Consulting

Industry 4.0 is an increasingly trending topic with many different ideas of what it actually means. But it is difficult to understand the differences between the third and the fourth industrial revolution without any practical examples.

Introduction to Industry 4.0: Core elements and business opportunities
Introduction to Industry 4.0: Core elements and business opportunities TCM261

Training and Consulting

Industry 4.0 is an increasingly trending topic with many different ideas of what it actually means. People working in leadership positions in particular encounter Industry 4.0 more and more and must be knowledgeable about its impacts.

From industry – for industry: Players 4.0 – Awareness training for Industry 4.0
From industry – for industry: Players 4.0 – Awareness training for Industry 4.0 AUT961

Training and Consulting

This training program provides comprehensive information on Industry 4.0 and creates understanding and acceptance for its implementation.

From industry – for industry: CP Factory/Lab Training – Production planning and control in smart factories
From industry – for industry: CP Factory/Lab Training – Production planning and control in smart factories DT251

Festo Training and Consulting

From industry – for industry: Simulation of CP Factory/Lab – an Introduction to CIROS®
From industry – for industry: Simulation of CP Factory/Lab – an Introduction to CIROS® DT241

Festo Training and Consulting

From industry – for industry: Basics of Industry 4.0 at the CP Factory/Lab
From industry – for industry: Basics of Industry 4.0 at the CP Factory/Lab DT211

Festo Training and Consulting

From industry – for industry: Factory tour at Scharnhausen Technology Plant
From industry – for industry: Factory tour at Scharnhausen Technology Plant DID1217

Festo Training and Consulting

The Scharnhausen Technology Plant is at the forefront of automation for the future and the leading Festo factory for the production of valves, valve terminals and electronics. With this factory, Festo meets current industrial challenges and global competition.

Mechanical Drives Training System
Mechanical Drives Training System Fundamentals for competent industrial mechanics

Skilled industrial mechanics are in demand worldwide. We rely on them to install, maintain, repair, and replace a vast array of mechanical equipment.

From industry – for industry: Industrial pneumatics
From industry – for industry: Industrial pneumatics PN111

Training and Consulting

Designed as a general introduction, this training provides an insight into pneumatic principles. It aims to familiarize participants with main pneumatic components and explain their functions. ...

 

This training includes a wide range of hands-on exercises, which give delegates the opportunity to put theory into practice and for learning-by-doing

From industry – for industry: CODESYS version 2 – A hardware independent introduction to PLC programming
From industry – for industry: CODESYS version 2 – A hardware independent introduction to PLC programming PLC281

Training and Consulting

CoDeSys is a tried-and-tested, globally introduced and hardware-independent software from 3S. It constitutes a Controller Development System according to the IEC 61131-3 with all defined programming languages independent of the hardware manufacturer. This training demystifies CoDeSys and gives participants confidence in using it.

From industry – for industry: Industrial hydraulics
From industry – for industry: Industrial hydraulics HY511

Training and Consulting

Designed as a general introduction, this training provides an insight into hydraulic principles. Main hydraulic components and their functions are explained. The participants are enabled to perform systematic maintenance and troubleshoot hydraulic systems.

From industry – for industry: Industry 4.0: Strategic competency management
From industry – for industry: Industry 4.0: Strategic competency management TCM231

Training and Consulting

In many companies, Industry 4.0 has significantly impact how work gets done. Professions and professional responsibilities are changing, new tasks are being created, and existing ones are either no longer required or are decreasing in significance. Mere qualification is not enough to integrate employees into this process of change and fully prepare them for their new job requirements.

NetLab
NetLab Networks and IT security in the context of Industry 4.0
Innovative learning solutions for Industry 4.0
Innovative learning solutions for Industry 4.0 Maximum flexibility with an integrated learning system
From industry – for industry: Industry 4.0 Assessment – Preparing your company for Digitalization and Industry 4.0
From industry – for industry: Industry 4.0 Assessment – Preparing your company for Digitalization and Industry 4.0

Training and Consulting

Our Industry 4.0 Assessment is the ideal tool to help you evaluate

your company’s Industry 4.0 maturity level and mark a starting

point for your digitalization strategy.

Training and Consulting
Training and Consulting Training and seminars from industry – for industry

Ongoing technology changes are continually transforming tasks in companies today, yet investment in technologies and machines alone is not enough to ensure success. People are the crucial factor. Employees must contend with the continuous technological changes. This requires an unprecedented
level of adaptability.

Qualification for Industry 4.0
Qualification for Industry 4.0

Industry 4.0 is all about future production processes


The centerpiece: the Smart Factory

Mobile Training Labs
Mobile Training Labs Hands-on Training, Wherever You Need it

Bridge the Gap between Trainees and Resources

Automation Technology Training Seminars
Automation Technology Training Seminars Designed for machine operators, factory technicians, and engineers
Reference Projects Global Project Solutions
Reference Projects Global Project Solutions
Holistic and turnkey education solutions
Holistic and turnkey education solutions Laboratory and workshop equipment for science, technology, and education

Knowledge is a resource that gives a decisive advantage in international competition, and is a guarantor of success especially in demanding industry segments. In many cases, an employee's original expertise will no longer be sufficient to keep up with the latest developments in the working environment.
Investing early in basic and further training pays off in every possible way. The promotion of lifelong learning thus becomes your most productive long-term investment for the future.

Festo Didactic - Leadership in Technical Education
Festo Didactic - Leadership in Technical Education

As a global partner for educational institutions, governments, state organizations and companies around the world, we design and implement training centers and laboratories, educational equipment and programs that train people to perform in highly dynamic and complex environments.

Mind-Sight Learning Content Management System
Mind-Sight Learning Content Management System LabVolt Series 47513
Geothermal Training System
Geothermal Training System LabVolt Series 46126

Bring a Complete Geothermal Home Energy System to your Classroom

Zobraziť 4 viac výsledkov ...
Odber RSS