72 Equipment Set TP 8012-5 220 – 240 V, 50 Hz 596088 The most important components at a glance: 1x 12 V Lead-Acid Batteries * 595060 1x Solar Panel Test Bench 595057 1x Monocrystalline Silicon Solar Panel 595058 2x 1 AC Energy Meter 594904 1x DC 48 V PWM Charge Controller 8241563 1x DC 48 V MPPT Charge Controller 595050 1x AC 230 V Power Supply 595930 1x 1 AC 230 V Grid-Tied Inverter 595053 1x DC 48 V Lamps 595055 1x AC 230 V Lamps 8165858 1x 48 V Lead-Acid Battery Pack 8174051 1x AC 24 V Power Supply 772050 1x 1 AC 230 V Stand-Alone Inverter 595052 1x 4-Quadrant Power Supply and Dynamometer Controller 595028 1x Data Acquisition and Control Interface DACI-1 595912 1x Solar Panel Emulator Function for the 4Q Power Supply/Dynamometer 581440 *A 12 V DC battery charger is required for this module. Users can use their own charger with 4 mm safety plugs or use the 4-Quadrant Power Supply and Dynamometer Controller. Necessary accessories, also order: 2x Digital Multimeter 579782 1x Communications Gateway* 595054 1x Connection Lead Set and Grounding Kit 595916 1x Mobile Frameline, Complete Model Without Energy Duct 8075133 1x Tabletop Workstation (DIN A4) 8153360 1x Tabletop Double-Sided Workstation (DIN A4) 8158409 * Only one per lab is necessary Recommended Learning Material Workbooks (→ page 162) Campus license: en 596125 de 798367 fr 8096492 Notes: The campus license includes the student and instructor manuals of the following workbooks: “Solar Power”, and “Photovoltaic Systems”. Printed workbooks available upon request. Courses on Festo LX: aSolar Power aPhotovoltaic Systems Solar Power, Complete TP 8012-5 Provide a complete learning experience in solar power production. This training package provides hands-on experience with basic solar power energy concepts, solar panel construction, operating characteristics and performance factors, before moving on to the operation and maintenance of photovoltaic systems in stand-alone or grid-tied scenarios. It combines TP 8012-3 and TP 8012-4 without duplication of hardware components. The training package contains the necessary equipment to perform the practical learning activities of the “Solar Power” and “Photovoltaic Systems” courses available on Festo LX (subscription required) or as a campus license (sold separately). Learners follow step-by-step instructions to connect modules and explore topics such as solar panel characteristics, battery energy storage, and system performance under varying conditions such as temperature, shading, orientation, and insolation. They also explore component selection for stand-alone or gridtied applications, system setup for DC and AC loads, energy efficiency, metering techniques, and the differences between MPPT and PWM charge controllers and inverters. The four-quadrant power supply and test stand’s solar panel emulator firmware feature simulates solar panel behavior under changing environmental conditions, providing a controlled environment to study system performance and compare the impact of MPPT and PWM charge controllers on energy efficiency and power output in both stand-alone and grid-tied systems. The tabletop solar panel tester also provides a controlled environment for hands-on experimentation with irradiance control, temperature monitoring, and shading simulation. Electric Power Technology > Training Packages TP 801X (EMS A4) > Renewable Energy
RkJQdWJsaXNoZXIy MzE0OTAwNw==