90 Modules Motors, Filters, Contactors 1 1 Squirrel-Cage Induction Machine Designed to be used with the Four-Quadrant Dynamometer Motor. The machine stator windings are independently connected, allowing connection in either wye or delta configuration. Order no. 595064 2 Synchronous Machine Designed to be used with the Four-Quadrant Dynamometer Motor. This machine can be operated either as a three-phase motor or a threephase generator. Order no. 595802 3 Power Thyristors Module that consists of six power thyristors (SCRs). Order no. 8 167245 4 Permanent Magnet DC Machine High-speed, brushed DC motor designed to be used with the Four-Quadrant Dynamometer Motor. Order no. 8 100085 5 Rectifier and Filtering Inductors Capacitors Module that consists of a series of inductors and capacitors to implement different types of filters plus a three-phase rectifier bridge for power electronics applications. Order no. 8 136516 6 Three-Phase AC Filter Module that consists of three inductors to be put in series in a threephase circuits and four capacitors in star connection with the neutral. Order no. 8 166653 2 4 5 6 7 3 7 Synchronization Lamps and Contactor Module that consists of a threephase contactor whose coil can be energized either manually with a toggle switch, or automatically with a thyristor fired by applying to the Remote Control input of the module, a low-level (TTL) signal from the Data Acquisition and Control Interface. Six safety connectors (one pair per phase) allow connection of electric devices or ac power sources across the contacts of the contactor. Three indicator lamps indicate the relative level of the voltage across their corresponding contact terminals. Order no. 8 208627 Electric Power Technology > Training Packages TP 801X (EMS A4) > Components
RkJQdWJsaXNoZXIy MzE0OTAwNw==