102 Building System Technology > Introduction to Building System Technology Power Supply Systems and Protective Measures TP 1111 The fundamentals of electrical protective measures Protecting people plays an important role when using electrical energy, as it is not visible and is recognizable only by its effects. Possible risks must therefore be minimized through suitable safety measures. Examples provide an introduction to the problems associated with electrical safety measures. Current conditions are examined and the risks resulting from the relevant situation are demonstrated by means of measurements. The subsequent analysis and interpretation of the measurement results show the relationships and identify measures Training content Power supply: – Power supply systems (TN, TT, IT system) – Protective measures in the different networks Service connection: – Components of a service connection system – Additional designations in the TN system (TN-C, TN-S, TN-C-S) – Selection of the protective measure and protective devices – Protective measure measuring devices – Planning and execution of initial tests in accordance with DIN VDE 0100-600 and repeat tests in accordance with DIN VDE 0105 and BGV A3 – Creating test reports – Safety and availability advice for customers Sub-distribution: – Using protective measures and measuring devices – Planning and execution of initial and repeat tests – Evaluation of the measurement results – Creating test reports – Identifying, describing and measuring risks due to errors – Systematic troubleshooting General: Conducting customer dialogues – for system commissioning – for repeat testing – for errors/malfunctions in the electrical system – following successful repair
RkJQdWJsaXNoZXIy MzE0OTAwNw==