175 → festo.com/didactic Learning Media > Courseware > Workbooks DC Power Electronics Training content – Operation and characteristics of diodes and switching transistors – Buck, boost, buck/boost, and four-quadrant choppers – Concept of voltage-type and current-type circuits, and freewheeling diodes – Ripple phenomenon in a chopper – Implement a lead-acid battery charger using a buck chopper with feedback loop Campus license: en On request Note: This workbook is included in multiple campus licenses. Please check with your representative to confirm which one applies to you. Course on Festo LX: aDC Power Electronics Introduction to Wind Power Training content – Wind turbines and small-scale wind power – Voltage-speed and torque-current characteristics of a wind turbine generator – Wind power variation with wind speed – Energy storage in batteries Campus license: en On request Note: This workbook is included in multiple campus licenses. Please check with your representative to confirm which one applies to you. Course on Festo LX: aIntroduction to Wind Power Single-Phase AC Power Circuits Training content – Voltage and current sine waves – Power dissipated in a resistive load – Inductive reactance and capacitive reactance – Relationship between the source frequency and the reactance of an inductor or a capacitor – Active, reactive, and apparent power – Impedance calculation method and the power triangle method Campus license: en On request Note: This workbook is included in multiple campus licenses. Please check with your representative to confirm which one applies to you. Course on Festo LX: aSingle-Phase AC Power Circuits Wind Power Systems Training content – Standalone wind power systems for DC loads – Standalone wind power systems for AC loads Campus license: en On request Note: This workbook is included in multiple campus licenses. Please check with your representative to confirm which one applies to you. Course on Festo LX: aWind Power Systems
RkJQdWJsaXNoZXIy MzE0OTAwNw==