34 Electricity and Electronics > Accessories 1 GW Instek GDM-533 Digital Multimeter The universal digital multimeter for basic training. Offers True RMS measurement, automatic and manual range selection, illuminated LCD display with 6000 counts, display hold, bar graph display, USB interface. – Voltage: 0.01 mV ... 1000 V – Current: 0.1 µA ... 20 A – Resistance: 0.1 Ω ... 60 MΩ – Capacitance: 0.01 nF ... 60 mF – Frequency: 1 Hz … 10 MHz – Measuring circuit category: CAT III/1000 V Order no. 8217596 2 Fluke 179 Digital Multimeter Meter for higher requirements in basic training. Automatic and manual range selection, 4-digit illuminated LCD display for measuring direct and alternating voltage, direct and alternating current, resistance, continuity, frequency, capacitance, diode test, temperature measurement, min./ max./mean value, display hold, bar graph, true effective value measurement (TRMS). – Voltage: 0.1 mV – 1,000 V – Current: 0.01 mA – 10 A – Resistance: 0.1 Ω – 50 MΩ – Frequency: 0.01 Hz – 100 kHz – Capacitance: 1 nF – 10,000 µF – Measuring circuit category CAT III/1000 V – Measuring circuit category CAT IV/600 V Order no. 571831 3 Fluke 1664 FC Installation Tester for VDE 0100 Installation tester for testing and accepting stationary installations as per VDE 0100/0413 and the international standard IEC 60364. Perfect for the practical demonstration of electrical protective measures in 3 4 combination with our EduTrainers for power supply systems and protective measures, and particularly for testing type B RCDs. For all basic installation tests including continuity, insulation, loop impedance, trigger time and trigger current of the residual current protective devices (RCDs), measuring ground resistance and phase sequence, including insulation pre-test to protect connected devices from damage. Internal memory, PC interface or Fluke Connect for documentation and reporting. Order no. 8064024 4 Beha-Amprobe Telaris ProInstall-0100 Installation Meter Low-cost installation tester with a good range of functions for testing the safety of electrical systems and work with our EduTrainern for power supply systems and protective measures, without test options for RCDs Type B. For testing and acceptance of fixed electrical installations in accordance with: DIN VDE 0100,ÖVE E 8001, NIV/NIN 2010, BS 7671, IEC 60364. Light and compact portable device with a clear user interface, a large backlit LCD display and a data logging function with a PC download. For all fundamental installation tests including insulation resistance, loop impedance and short circuit measurement, triggering time and tripping current of RCDs/quick-acting protective devices, low-ohm measurement and rotary field testing. Order no. 8040008 Software for Beha-Amprobe Telaris ProInstall-0100 Convenient, extensible software for logging measurement data per DIN VDE 0100/0105. Log design per ZVEH protocol. Includes interface adapter TL USB. Order no. 8040009 1 2 Accessories Multimeters, Testers
RkJQdWJsaXNoZXIy MzE0OTAwNw==