102 24-month Festo Didactic warranty Suitable for the Hydraulics course of the Federal Institute for Vocational Education and Training Equipment Set for Hydraulics, Federal Institute for Vocational Training, Exercises A – Z Federal Institute for Vocational Training Equipment Set for Hydraulics – Electrohydraulics and Electrical Devices Required for the Hydraulics training course of the Federal Institute for Vocational , exercises A - Z In combination with the basic equipment set of the Federal Institute for Vocational Training (order no. 8025069), the institute's supplementary equipment set for Electrohydraulics provides all the equipment for carrying out the exercises A-Z of the institute's course on hydraulics. Electrohydraulics extension set 8025073 The most important components at a glance: 1x 4/2-way solenoid valve, spring return 544346 1x 4/3-way solenoid valve, closed mid-position 544347 1x 4/3-way solenoid valve, bypass mid-position (P –> T) 544349 1x 4/3-way solenoid valve, relieving mid-position (AB −> T) 544348 2x Relay 3-way 162241 1x Signal input, electrical 162242 1x Time relay, 2-way 162243 1x Proximity switch, inductive, M12 548643 Federal Institute for Vocational Training Hydraulics Equipment Set – Hand Lever Valves Optional for the hydraulics course of the Federal Institute for Vocational Training, exercises without electrohydraulics In combination with the basic equipment set of the Federal Institute for Vocational Training (order no. 8025069), the institute's equipment set for Hand Lever Valve provides the equipment required for carrying out the exercises without the electrohydraulic section of the institute's Hydraulics course. Extension set for hand lever valves 8025072 The most important components at a glance: 1x 4/2-way hand lever valve, spring return 544342 1x 4/3-way hand lever valve, mid-position closed, detenting 544343 1x 4/3-way hand lever valve, bypass mid-position (P –> T), detenting 544345 1x 4/3-way hand lever valve, relieving mid-position (AB −> T), detenting 544344 Recommended learning material eLearning Course – Basic Principles of Hydraulics – Simple Hydraulic Circuits – Hydraulic Actuators – Hydraulic Valves – Hydraulic Power Units – Basic Principles of Electrohydraulics – Electrohydraulic Components – Basic Electrohydraulic Circuits Recommended simulation software – FluidSIM Hydraulics Also order: Federal Institute for Vocational Training Hydraulics course (On request) Equipment set for Hydraulics, Federal Institute for Vocational Training Hydraulics – Basic Equipment Suitable for the Hydraulics course of the Federal Institute for Vocational Training, exercises A – Z Training content The basics of hydraulic control technology is conveyed by the 21 exercises of the Hydraulics course of the Federal Institute for Vocational Training. The topics covered are drive units, directional control valves and drives, shut-off and flow valves, pressure regulators and pressure switches, hydraulic accumulators, application circuits, lifting a load, burr circuit, neutral circulation of the pump flow, commissioning, and maintenance. Basic equipment set in organizer 8025069 The most important components at a glance: 1x Differential cylinder 16/10/200 with cover 572746 1x 3-way pressure reducing valve 544337 1x 2-way flow control valve 544338 1x Flow control valve 152842 1x One-way flow control valve 152843 4x T-distributor 152847 1x Diaphragm accumulator with shut-off block 152859 1x Weight, 9 kg, for cylinder 152972 1x Pressure switch, electronic 548612 1x Flow sensor 567191 2x Hydraulic motor 152858 1x Pressure relief valve, piloted 8025067 1x Pressure relief valve 544335 1x Non-return valve, unlockable 544339 1x Shut-off valve 152844 2x Non-return valve, 0.05 MPa opening pressure 548617 2x Non-return valve, 0.6 MPa opening pressure 548618 2x Pressure gauge 152841 2x 4-way distributor with pressure gauge 159395 Required accessories, order at the same time: 6x Hose line with quick connection coupling, 600 mm 152960 4x Hose line with quick connection couplings, 1000 mm 152970 4x Hose line with quick connection coupling, 1500 mm 159386 Pressure relief unit 152971 4 mm safety laboratory cables → Page 159 Digital multimeter 8217596 Aluminum profile plate → Page 11, 17 Hydraulic power unit → Page 148 ff. Cover for weight, 9 kg → Page 143 Tabletop power supply unit → www.festo.com/didactic Power supply unit for mounting frame → Page 158 Combination options (can only be ordered in combination) – Basic equipment set and supplementary equipment set for electrohydraulics (order no. 8025069 and order no. 8025073) – Basic equipment set and supplementary equipment set for hand lever valves (order no. 8025069 and order no. 8025072) – Basic equipment set and supplementary equipment set for hand lever valves and the Electrohydraulics Supplementary Equipment Set (Order nos. 8025069, 8025072 and 8025073) Hydraulics Training Packages > Equipment Sets > Federal Institute for Vocational Education and Training Hydraulics
RkJQdWJsaXNoZXIy MzE0OTAwNw==