37 Visit the website for more information about the components. Components Workstations 1 Process Workstation (Temperature, Pressure, Flow, and Level) Features two 60 L (16 gal) tanks and four centrifugal pumps. Designed for performing experiments with temperature, pressure, flow, and level processes. Delivered partly-assembled. Order no. 582388 2 Process Workstation (Pressure, Flow, and Level) Features two 60 L (16 gal) tanks and four centrifugal pumps. Designed for pressure, flow, and level processes, but can be upgraded for temperature processes. Delivered partly-assembled. Order no. 582388 3 Process Workstation Features a tank and a centrifugal pump. Delivered partly-assembled. Designed for pH/conductivity or air pressure/flow processes. Order no. 588302 Instrumentation Workstation (Without Heating/Cooling Unit) Houses the Electrical and Pneumatic Units and other electrical components. Can be linked to a Process Workstation with a hitch mechanism, part of the Piping and Accessories Kit. 4 Without Heating/Cooling Unit Partly assembled 582393 Fully assembled 588306 5 With Heating/Cooling Unit Order no. 582391 6 Storage Station Stores up to four flange tops, many flow meters and control valves on six galvanized struts, a few devices on two instrumentation mounting pipes, and various pieces of equipment in the three stainless-steel storage boxes. Order no. 588301 7 Instrumentation Mounting Pipe Vertical pipe used to install instruments at the appropriate height and close to the point of measurement. Can be mounted on both sides of the workstations. Order no. 582444 8 Drip Tray Large painted stainless steel drip tray to collect the water. Hand valves and a drain tube included with associated parts. Front side 582447 Back side 582448 9 Process Supports (pH) Package that contains various process struts, a long wire duct, a hose storage rack, and more. Order no. 588428 Package that avoids equipment redundancy if the pH and Conductivity Process Learning System is acquired as an add-on to a Process, Flow, Level, and Temperature Process Learning System. Order no. 588426 10 Process Supports Packages containing a subset of the following elements: process struts, a storage rack to store up to four optional flange tops, a long wire duct, a hose storage rack, and other assorted items. Designed to address the possibility of two teams sharing the same station and to prevent equipment redundancy. P/F/L/T 582445 Temperature 582446 P/F/L 588425 P/F/L (second team) 588427 Industrial Instrumentation and Process Control > Components Notes about workstations: – Most workstations are double-sided to allow two teams of two students to work at the same time, one team on each side. – Steel frames ensure reliability and durability. – All are equipped with lockable casters for mobility. 1 2 3 6 4 5 7 8 9 10 Back side P/F/L/T
RkJQdWJsaXNoZXIy MzE0OTAwNw==