→ festo.com/didactic 18 Learning Media > Courseware > Industrial Process Learning Systems Process Control (Air Pressure and Flow) This workbook guides learners through study of theory and practical experimentation using the Air Pressure and Flow Process Learning Systems (LV 3533). Content: – Process characteristics – Determining the dynamic characteristics of an air process open-loop method, response curve, safety – Tuning and control of a pressure loop (control schemes, open-loop Ziegler-Nichols and ultimate-cycle methods) – Feedback control (on-off and PID control, structure of controllers) – Tuning and control of a flow loop – Process control troubleshooting aeBook 11227 on Festo LX Campus license (PDF format) en 585124 Familiarization with the Process Control Demonstrator This user guide covers the operation of the PlantPAx Distributed Control System Demonstrator. Content: – Process Control Demonstrator – Control panel – Disconnect switch and emergency push-button – AC drives – PLC fundamentals – The human-machine interface – Process columns – Differential-pressure transmitter – Radar level transmitters – Electromagnetic flow transmitter – Temperature probes and transmitter – Three-valve manifold – Solenoid valve – Control valve – Venturi tube – Rotameter Campus license (PDF format) en 585124 Control Valves This user guide explains how to operate specific control valves of the Process Control Learning Systems (LV 6090) or Industrial Process Learning Systems (LV 353X). Content: – Basic control valve theory – Basic control valve – Pneumatic control valve with a positioner – Control valve with DVC2000 – Control valve with DVC6000 – HART/FF – Control valve with DVC6200 – HART/FF – Electric control valve – Air control valves – Three-way control valves – Using Fieldcare via the HART protocol aUser Guide 9847 on Festo LX Campus license (PDF format) en 585124 Flow Primary Elements This workbook covers the operation of two flow primary elements, orifice plates and pitot tubes, in the context of the Industrial Process Learning Systems. Content: – Orifice plate – Pitot tube – Inspection, maintenance, and storage aeLab course 13788 on Festo LX Campus license (PDF format) en 585124
RkJQdWJsaXNoZXIy MzE0OTAwNw==