→ festo.com/didactic 27 Included in the Scope of Delivery: Various Facilities for Measuring, Controlling and Regulating – Simplifies commissioning, simulation and display using the simulation box – Multimedia measuring, controlling, regulating, operating, monitoring and commissioning using EasyPort and FluidLab-PA Closed-Loop. – Start processes in the PLC or operate and monitor them with the touch panel – The control task is handled by the PLC. The controller parameters are set on the touch panel. All process variables are displayed in a user-friendly way – including trend graphs on the touch panel. The MPS PA complete system provides everything needed for an efficient start in measurement and control technology. MPS PA 204 Learning System, 220 – 240 V, 50/60 Hz 8079868 MPS PA 204 Learning System, 120 V, 60 Hz 8079867 Special Training Aims – Set-up, wiring, and commissioning of a system for process technology – Measurement of electrical and process engineering variables such as level, flow rate, pressure, and temperature – Set-up and commissioning of control circuits – Assessment of control response – Networking of process engineering systems – Process operation and monitoring, system management – Selection, deployment, and control of process fittings – Analysis of controlled systems and control circuits – Parameter setting and optimization of P, PI, or PID controllers – Writing open-loop and closed-loop control programs – Process operation and monitoring – Inspection, maintenance, and servicing The PLC control packages includes SIMATIC S7-1500 4x EduTrainer Universal with SIMATIC S7-1512C, 4x SIMATIC Touch Panel MTP700 Operator unit, 1x Ethernet switch XB005 EduTrainer Compact The MPS PA 204 system contains everything you need for training: – Stations: Filtration, mixing, reactor, bottling with trolley, mounting frame and power supply unit – Control technology: 1x PLC control package, 1x EMERGENCY-STOP board, 2x EMERGENCY-STOP control panel, 4x EasyPort – Software: 4x FluidLab-PA Closed-Loop (perpetual license, 1 user) For simple commissioning, simulation and display using the simulation box: Simulation box, digital/analog 526863 I/O data cable with SysLink connectors (IEEE 488) on both ends, crossover 167106 Analog cable, crossover, 2 m 533039 Recommended accessories: IEC power cable → festo.com/didactic Replacement filter cartridge 544303 Compressor → see below Cooling unit with heat exchanger → see below IoT Kit for MPS PA 8162599 Air Control System AirCS equipment set → Page 15 8023858 Recommended software: FluidLab-PA Process → Page 170 FluidLab-PA Multi-Loop → Page 171 Recommended Learning Material Workbook → page 155 Campus license: de 8131019 en 8131020 Courses on Festo LX aProcess Automation aOpen- and Closed-Loop Control aBasic Principles of Closed- Loop Control Technology aBasics of Production Control Introduction and Fundamentals > MPS PA 204 Learning System Successful Project Work Based on Modular Construction Learning by doing – the MPS PA system offers accessible, hands-on process technology. Project ideas can be implemented in a flash, and risk-free. Possibility of Expansion: Cooling Unit with Heat Exchanger For more options in temperature control experimentation 220 – 240 V, 50/60 Hz 8164444 120 V, 60 Hz 8162598 Compressor Oil-lubricated, very quiet (45 dB (A)) compressor with pressure reducer and water separator. 230 V 91030 100 V – 120 V 565440
RkJQdWJsaXNoZXIy MzE0OTAwNw==