Service units

Learn more about Service units
MS series

MS series

Size 4, 6, 9

Connection G1/8, G1/4, G3/8, G1/2, G3/4, G1, also available with NPT thread

Pressure 0.3 ... 12 bar

Flow rate 550 ... 14000 l/min

Pressure gauge with bar, psi, MPa

Grade of filtration 0.01 ... 40 µm

Condensate drain

- Manual

- Semi-automatic

- Fully automatic

Plastic bowl with plastic bowl guard

Metal bowl

Flow direction

- From left to right

- From right to left

Proportional lubricator.

D series, metal design

D series, metal design

Size MINI, MIDI, MAXI

Connection G1/2, G1/4, G1/8, G3/8, G3/4

Pressure 2.5 ... 12 bar

Flow rate 550 ... 6000 l/min

Condensate drain

- Manual

- Fully automatic

Plastic bowl with metal bowl guard

Direct proportional lubricator

D series, polymer

D series, polymer

Size MINI

Connection G1/8, G1/4

Pressure 0.5 ... 7 bar

Flow rate 400 ... 1200 l/min

Condensate drain

- Manual

- Semi-automatic

Plastic bowl without bowl guard

Proportional lubricator

Selection Guide

Service unit

MS seriesDepending on the application, service units typically consist of a wide range of functional modules, such as a manual pressurisation and exhaust valve, a filter regulator and a branching module. At Festo, the most common combinations in the MS series are available from stock pre-assembled. In addition, with the configurator MSB of the MS series, complex service units can also be individually configured step by step, which is ideal for any application. These units are delivered fully assembled, pressure tested and therefore ready to install. As part of the Festo core product range, these individual configurations can also be processed worldwide and are therefore quickly available. They are available in the three sizes MS4, MS6 and MS9 for a wide range of flow rates. Depending on the configuration, they are suitable for use in potentially explosive areas of zones 1, 2, 21 and 22 as well as with UL approval.
D series, metalThe most common combinations of the D series are also available from stock, which is suitable for basic applications. The three sizes MINI, MIDI and MAXI can be selected for a wide range of flow rates.
D series, polymerIn the D series with polymer housing, four distinct configurations can be ordered from stock pre-assembled. One size is available for very simple applications.