Compressed air preparation

Learn more about Compressed air preparation
Service units

Service units

Service units for preparing compressed air, consisting of different combinations of units in two series.

Filter regulators/lubricators

Filter regulators/lubricators

Filter regulator

Lubricators

Filter regulator

Filter regulator

Space-saving design with filter and regulator integrated in a single unit

Filter

Filter

Filters for purifying the compressed air for various quality classes

- Standard filter

- Fine filter

- Micro filter

- Activated carbon filter

Controllers

Controllers

Pressure regulators for air preparation

- Standard regulators with different pressure regulation ranges

- Precision pressure regulating valves

- Electrically actuated pressure regulators

- Regulator manifolds

Lubricators

Lubricators

Lubricators for improving the compressed air as lubricant for pneumatic components.

On/off valves and soft-start valves

On/off valves and soft-start valves

On/off valves for switching on and exhausting systems.

Soft-start valves for gradual pressure build-up.

Air dryer

Air dryer

Adsorption dryer with specific pressure dew point and high flow rate, as well as membrane air dryer with flow-rate-dependent pressure dew point.

Air distributor

Air distributor

Branching modules and distributor blocks as an intermediate outlet for different qualities of compressed air.

Condensate drain

Condensate drain

Condensate drain for attaching to service units and compressed air networks and systems, for automatically draining the collected condensate.

Pressure booster

Pressure booster

Components for pressure boosting in one section of a system.

Pressure indicators

Pressure indicators

Pressure indicators for compressed air preparation.

Accessories for air preparation

Accessories for air preparation

Assembly components

Sub-bases

Safety components

Pressure indicators

Device-specific accessories.

Selection Guide

Compressed air treatment

Service unitThe service unit ensures the correct compressed air quality and filters compressor oil, condensate and dirt particles from the air. Depending on the application, a service unit consists of a pressure regulator, various filters, a branching module and pressurisation and exhaust valves. At Festo, different combinations are available from stock. In addition, service units can be configured individually in the MS modular system.
Filter regulator/lubricatorA unit consisting of a filter regulator and lubricator is used when the compressed air not only needs to be cleaned but also oiled. The filter regulator removes the condensate and coarse dirt from the compressor. The lubricator supplies a precisely dosed amount of pneumatic lubricating oil.