Tubing

Learn more about Tubing
Standard O.D. tubing

Standard O.D. tubing

Outside diameter 2, 3, 4, 6, 8, 10, 12, 14, 16, 22, 28 mm

Outside diameter 1/8", 5/32", 3/16", 1/4", 5/16", 3/8", 1/2", 5/8"

Standard O.D.

Operating medium

- Compressed air

- Vacuum

- Water

Materials

- Polyamide

- Polyvinyl chloride

- Perfluoroalkoxyalkane

- Polyethylene

- Polyurethane

DUO tubing

2 tubes fused together

Standard I.D. tubing

Standard I.D. tubing

Diameter 2, 3, 4, 6, 9, 13, 19 mm

Standard I.D.

Operating medium

- Compressed air

- Vacuum

- Water

Materials

- PVC with reinforcing fabric

- Nitrile rubber

- Nitrile rubber with metal braiding

- Polyamide

- Polyethylene

- Polyurethane

DUO tubing

2 tubes fused together.

Spiral tubing

Spiral tubing

Diameter 4, 6, 8, 10, 12 mm

Working length 2.4, 4.8, 6, 7.5, 15 m

Operating medium

- Compressed air

- Vacuum

- Water

Materials

- Polyamide

- Polyurethane

Assembled with fitting.

Selection Guide

Pneumatic tubing

Standard O.D. tubingStandard O.D. pneumatic tubing is the current standard in pneumatics. In this category, you will find suitable tubing for all current fittings (such as QS, NPQM, NPQH etc.). For standard O.D. tubing, the outside diameter of the tube is specified as the tube size.
Standard I.D. tubingStandard I.D. pneumatic tubing was the standard before the emergence of push-in fittings. In this category, you will find suitable tubing for all old fittings (such as CK, CN, PK etc.). For standard I.D. tubing, the inside diameter of the tube is specified as the tube size.
Spiral tubingSpiral tubing is used whenever the working lengths and tensile loads are different. Spiral tubing is a suitable accessory especially in combination with pneumatic tools (such as blow guns).