learning-systems-training-packages-hydraulics

Hydraulics training packages

Modular and flexible – expand as required

For example, you can start with the basic level in electrohydraulics and expand this package with the advanced level, or you can move from the basic level in hydraulics to mobile hydraulics – the choice is yours! Our training packages are modular. Would you like to train on a specific group of topics? Go for it! Order all equipment set components individually to put your own ideas into practice.

Overview and structure of our hydraulics training packages

learning-systems-hydraulics-overview-en

Hydraulics training packages:

Hydraulics, Basic level, TP 501

Basic hydraulics training

A solid foundation for practical basic and further training. Training package TP 501 only covers hydraulic control systems.

To TP 501

Hydraulics, Advanced level, TP 502

Hydraulics for advanced users

Training package TP 502 builds directly on the training content covered in the basic package TP 501 and then adds an extra 15 projects.

The components and necessary accessories from equipment set TP 501 are required to complete the projects.

To TP 502

Troubleshooting in hydraulics, TP 501+

Realistic!
Advanced equipment set TP 501+ covers systematic troubleshooting in hydraulics and is offered as an extension to equipment set TP 501. TP 501+ contains components with predefined, realistic errors. Set up hydraulic circuits with TP 501 and replace individual components with defective ones.

To TP 501+

Electrohydraulics, Basic level, TP 601

Basic training in electrohydraulics

This training package covers the basic physical principles of electrical engineering and electrohydraulics, as well as the functions and use of electrohydraulic and control technology components.

To TP 601

Electrohydraulics, Advanced level, TP 602

Electrohydraulics for advanced users

This training package builds directly on the training content of the basic package TP 601 and adds more in-depth projects to it.

The components and the necessary accessories from TP 601 are required in order to complete the projects.

To TP 602

Measurement/control in hydraulics, TP 610

Measurement and control with FluidLab®-H

Fit for tomorrow?
This advanced level extends the training packages TP 501 and TP 601 to include measurement and control.

You will need TP 501 and TP 601 to complete the exercises.

To TP 610

Closed-loop hydraulics, Basic level, TP 511

Basic training for closed-loop hydraulics

Hydraulic closed-loop control circuits are normally operated with continuous valves. A control valve with integrated electronics, linear characteristic curve (volumetric flow rate relative to piston position) and zero overlap makes commissioning easy and provides good results in the control circuit.

To TP 511

Proportional hydraulics, Basic level, TP 701

Basic proportional hydraulics training

Proportional valves are continuous valves that, thanks to the use of proportional solenoids, not only permit simple switching positions, but also allow infinitely variable valve opening adjustment.

To TP 701

Proportional hydraulics Advanced level, TP 702

Challenging further training in proportional hydraulics

Training package TP 702 builds directly on the training content covered in basic package TP 701 and expands it with nine in-depth practical problems.

To TP 702

Mobile hydraulics, Basic level, TP 801

Mobile hydraulics – Working hydraulics 1, Basic level, TP 801

Mobile hydraulics has a range of specific features compared to conventional industrial hydraulics. The training content is therefore usually explained and demonstrated directly on the vehicle. But what if the hydraulic components being explained or the vehicle are not accessible or the entire system is too complex for teaching purposes?
Our training system for mobile hydraulics closes the gap between the basic principles of hydraulics and complete hydraulic systems in vehicles.

To TP 801, working hydraulics 1, basic level

Mobile hydraulics, Advanced level, TP 802

Mobile hydraulics – Hydrostatic steering system, Advanced level, TP 802

As with all our training packages, mobile hydraulics, too, is designed so that all components can be used as a complete and compatible system. This means that many elements of the basic level can also be used for experiments at advanced levels. The components and accessories from the equipment set TP 801 are required to carry out the projects.

To TP 802, hydrostatic steering system

Mobile hydraulics, Advanced level, TP 803

Mobile hydraulics – Working hydraulics 2, Advanced level, TP 803

The advanced level focuses on the load-sensing system with variable displacement pump, control block, pilot control and up to two consumers.

Components and accessories from the equipment sets TP 801 and TP 802 are required to carry out the projects.

To TP 803, working hydraulics 2, advanced level

Measuring, Advanced level, TP 810

Measure, visualise and analyse with our diagnostic system FluidLab®-M.

To TP 810

Supplementary equipment sets for Hydraulics:

Hydraulics TP 501 to Electrohydraulics

Supplementary equipment set to upgrade from Hydraulics, Basic level, TP 501 to Electrohydraulics, Basic level, TP 601

Supplementary equipment sets are an economical way of expanding a basic level training package by including the topics of another basic level.

To supplementary equipment set TP 501 for TP 601

Hydraulics TP 502 to Electrohydraulics

Supplementary equipment set to upgrade from Hydraulics TP 501 and TP 502 to Electrohydraulics, Basic level, TP 601

Supplementary equipment sets are an economical way of expanding a basic level training package by including the topics of another basic level.

To supplementary equipment set TP 501 and 502 for TP 601

Hydraulics to Mobile hydraulics, TP 801

Supplementary equipment set to upgrade from Hydraulics, Basic level, TP 501 to Mobile Hydraulics – Working Hydraulics 1, TP 801

Supplementary equipment sets are an economical way of expanding a basic level training package by including the topics of another basic level.

To the supplementary equipment set TP 501 for TP 801

Control with LOGO! 8

Supplementary equipment set: control with LOGO! 8 TP EduTrainer®Compact TP

A quick, uncomplicated and inexpensive introduction to logical signal processing. This package includes everything you need to implement training packages 201 or 601.

Control with LOGO! 8

Control with FluidSIM®/EasyPort USB

Supplementary equipment set Control with FluidSIM®/EasyPort USB

With this package, you use the software FluidSIM®to implement the training packages. FluidSIM®controls and processes the inputs and outputs at the universal connection unit via EasyPort USB in line with your programming, for example through the digital module included in FluidSIM®.
The supplementary equipment set for Controlling with FluidSIM® includes everything you need to implement training packages TP 201 and TP 601. FluidSIM®pneumatics for TP 201 or FluidSIM®hydraulics for TP 601 are a prerequisite.

Control with FluidSIM®/EasyPort USB

Online dictionary and symbols

Dictionary

Our free for automation technologyTo the online dictionary

symbols

On the following pages you will find the symbolsfor our products. The symbols conform to ISO 1219, part 1 and EN 60617, parts 2 to 13.

Communities

InfoPortal

InfoPortal

The Festo Didactic InfoPortal provides you with support and technical information about our learning systems. This information includes details about how to set up, commission and operate the learning systems.

Explore our InfoPortal!

T.EACH

In future, the knowledge and exchange platform "T.EACH" will provide free training materials worldwide for all areas of technology, such as electrical engineering, robotics and automation, in different languages.

Teachers and trainers can download course materials, exchange ideas with other teachers and upload their own materials to sell using a digital currency.

Discover our technical education community T.EACH!