Hit enter to search or ESC to close

IO-Link master module CPX-E-4IOL

CPX-E-4IOL Part no.  4080495
  • Individual components for the automation system CPX-E
Select basic features

Calculate delivery date
Close Technical Data
Show Technical Data
Dimensions W x L x H
18.9 mm x 76.6 mm x 124.3 mm
Power supply, type of connection
Terminal strip
Vibration resistance
Transport application test with severity level 1 as per FN 942017-4 and EN 60068-2-6
Permissible voltage fluctuations load
± 25 %
Note on ambient temperature
-5 - 50 °C for horizontal installation
Intrinsic current consumption at nominal operating voltage for electronics/sensors
Typically 50 mA
Intrinsic current consumption at nominal operating voltage load
Typically 15 mA
Diagnostics via bus
Wire break
Short circuit
General error
Parameter error
Module error
Device missing/failed
Power supply, connection pattern
Power supply, information on conductor diameter
0.2 - 2.5 mm² for flexible conductors without cable end sleeves
Permissible voltage fluctuations for electronics/sensors
± 25 %
Power supply, connection technology
Spring-loaded terminal
Shock resistance
Shock test with severity level 1 as per FN 942017-5 and EN 60068-2-27
Module parameters
Actuator supply short circuit diagnostics
Response to short circuit/overload
Deactivate sensor supply
Channel parameters
Forcing channel x
Cycle time
Channel status
Deactivate actuator supply
Channel mode
Device fault code
Diagnostics via LED
Faults per module
Status per channel
Electrical connection, IO-Link®, connection technology
Spring-loaded terminal
Electric IO-Link® connection, connection pattern
Electrical IO-Link® connection, connection type
4x terminal strip
IO-Link®, communication
C/Q LED green
IO-Link® electrical connection, information on conductor cross section
0.2 - 2.5 mm² for flexible conductors without cable end sleeves
Nominal operating voltage DC for electronics/sensors
24 V
Power supply, number of pins/wires
Nominal operating voltage DC load
24 V
Electrical IO-Link® connection, number of pins/wires
Power supply, conductor diameter
0.2 mm² ... 1.5 mm²
IO-Link® electrical connection, conductor cross section
0.2 mm² ... 1.5 mm²
Width dimension
18.9 mm
Type code
Fuse protection (short circuit)
Internal electronic fuse, load per channel
Internal electronic fuse, sensor per module
Electrical isolation between channel and internal bus
Electrical isolation between channels
CE marking (see declaration of conformity)
As per EU EMC directive
Corrosion resistance class (CRC)
0 - No corrosion stress
Storage temperature
-20 °C ... 70 °C
Relative air humidity
95 %
Protection against direct and indirect contact
Degree of protection
Ambient temperature
-5 °C ... 50 °C
RCM compliance mark
Product weight
96 g
IO-Link®, protocol version
Master V 1.1
IO-Link®, communication mode
SIO, COM1 (4.8 kBd), COM2 (38.4 kBd), COM3 (230.4 kBd)
Configurable via software
IO-Link®, port class
IO-Link®, number of ports
IO-Link®, process data width OUT
8–32 bytes parameterizable
IO-Link®, process data width IN
8–32 bytes parameterizable
IO-Link®, minimum cycle time
Depends on minimally supported cycle time of connected IO-Link® device
Type of mounting
With H-rail
Note on materials
Contains paint-wetting impairment substances
Housing material

Product Support