Hit enter to search or ESC to close

Automation system CPX-E

When used as an automation system, the CPX-E acts as the central controller for your custom handling system. The CPX-E is designed for use as an EtherCAT master controller and motion controller in IP20 or a compact, reasonably priced remote I/O.
CPX-E Part no.  5237644
  • Modern control system with high performance
  • Fieldbus master interfaces, EtherCAT® master, fieldbus slave interfaces, PROFINET, EtherNet/IP, PROFIBUS, EtherCAT digital input modules (16DI), digital output modules (8DO/0.5A)
  • Analog input modules (current, voltage), analog output modules (current, voltage)
  • Modern programming with CoDeSys V3 to IEC 61131-3
  • Integration of SoftMotion functions (SoftMotion)
  • Compact I/O assembly
  • Easy mounting of the control system

Please configure your product

Calculate delivery date
Close Technical Data
Show Technical Data
Shock resistance
Shock test with severity level 1 as per FN 942017-5 and EN 60068-2-27
Note on ambient temperature
-5 - 60 °C for vertical installation
Reverse polarity protection
Relative air humidity
95 %
Permissible voltage fluctuations for electronics/sensors
± 25 %
Vibration resistance
Transport application test with severity level 1 as per FN 942017-4 and EN 60068-2-6
Type of mounting
With H-rail
Protection against direct and indirect contact
Nominal operating voltage DC for electronics/sensors
24 V
Power failure buffering
10 ms
Width dimension
18.9 mm
Type code
Via bus
Max. number of modules
Internal cycle time
< 1 ms
Max. power supply
8 A
CE marking (see declaration of conformity)
As per EU EMC directive
Corrosion resistance class (CRC)
0 - No corrosion stress
Storage temperature
-20 °C ... 70 °C
Degree of protection
Ambient temperature
-5 °C ... 50 °C
RCM compliance mark
Electrical actuation
Integrated controller
Max. address capacity outputs
64 byte
Max. address capacity inputs
64 byte
Note on materials
Contains paint-wetting impairment substances
Housing material

Support / Downloads