Quarter turn actuator

DAPS-0960-090-R-F14-MW

8005009

Product Documentation

Download Datasheet
Spare parts
Spare parts

Product Documentation

Download Datasheet
Pieces
Configurator is not supported on mobile devices
  • Accessories
  • Technical Data
  • Support / Downloads
Close Technical Data
Show Technical Data
Size of valve actuator
0960
Flange hole pattern
F14
Swivel angle
92 deg
Depth shaft connection
38.5 mm
Type code
DAPS
Standard connection for valve
ISO 5211
Cushioning
No cushioning
Mounting position
Any
Mode of operation
Double-acting
Design
Scotch yoke system
Position sensing
None
Closing direction
Clockwise closing
Symbol
00991265
Valve connection conforms to standard
VDI/VDE 3845 (NAMUR)
Safety integrity level (SIL)
Up to SIL 2 high demand mode
Up to SIL 2 low demand mode
Operating pressure
1 bar ... 8.4 bar
Nominal operating pressure
5.6 bar
ATEX category gas
II 2G
Type of ignition protection for gas
Ex h IIC T6...T3 Gb X
ATEX category for dust
II 2D
Type of (ignition) protection for dust
Ex h IIIC T85°C...T200°C Db X
Explosive ambient temperature
-20°C <= Ta <= +60°C
Ambient temperature
-20 °C ... 80 °C
Explosion prevention and protection
Zone 1 (ATEX)
Zone 2 (ATEX)
Zone 21 (ATEX)
Zone 22 (ATEX)
Operating medium
Compressed air as per ISO 8573-1:2010 [7:4:4]
Information on operating and pilot media
Operation with oil lubrication possible (required for further use)
CE marking (see declaration of conformity)
as per EU explosion protection directive (ATEX)
Corrosion resistance class (CRC)
2 - Moderate corrosion stress
Torque at nominal operating pressure and 0° swivel angle
960 Nm
Torque at nominal operating pressure and 50° swivel angle
480 Nm
Torque at nominal operating pressure and 90° swivel angle
720 Nm
Air consumption at 6 bar per cycle 0°-nominal swivel angle-0°
42.35 l
Product weight
23800 g
Shaft connection
T36
Pneumatic connection
G1/4
Note on materials
RoHS-compliant
Cover material
Wrought aluminum alloy
Seals material
FPM
NBR
PUR
Housing material
Wrought aluminum alloy
Material of screws
High-alloy steel
Shaft material
High-alloy steel
Material number for shaft
1.4305