Hit enter to search or ESC to close

Pressure sensor SPAN-B2R-G18M-PNLK-PNVBA-L1

Extremely compact and versatile: the attractively priced pressure sensor SPAN is amazingly flexible thanks to switchable electrical outputs and a very wide range of options for pressure measuring ranges and pneumatic connections.
SPAN-B2R-G18M-PNLK-PNVBA-L1 Part no.  8035534
  • For monitoring compressed air and non-corrosive gases
  • For network monitoring, regulator monitoring, leak test, object detection
  • Relative method of measurement based on a piezoresistive measuring cell
  • Serial communication integrated using IO-Link® 1.1
  • Compact design 30 x 30 mm
  • High-contrast display with blue backlight
Select basic features

Pieces
Calculate delivery date
Configure your product
Close Technical Data
Show Technical Data
Type code
SPAN
Electrical connection 1, connection technology
Connection diagram L1J
Electrical connection for input 1, connection pattern
00995428
KC characters
KC EMC
Electrical connection 1, connection type
Plug
Electrical connection 1, number of pins/wires
4
Symbol
00995685
Certification
RCM compliance mark
c UL us - Listed (OL)
CE marking (see declaration of conformity)
As per EU EMC directive
As per EU RoHS directive
Certificate issuing authority
UL E322346
Note on materials
RoHS-compliant
Measured variable
Relative pressure
Method of measurement
Piezoresistive pressure sensor
Pressure measuring range initial value
-1 bar
Pressure measuring range end value
1 bar
Max. overload pressure
5 bar
Operating medium
Compressed air as per ISO 8573-1:2010 [7:4:4]
Inert gas
Information on operating and pilot media
Operation with oil lubrication possible
Temperature of medium
0 °C ... 50 °C
Ambient temperature
0 °C ... 50 °C
Accuracy in ± % FS
1.5 %FS
Repetition accuracy in ± %FS
0.3 %FS
Temperature co-efficient in ± %FS/K
0.05 %FS/K
Switching output
2 x PNP or 2 x NPN switchable
Switching function
Auto difference monitoring
Threshold value comparator
Window comparator
Switching element function
N/C contact/N/O contact switchable
Max. output current
100 mA
Analog output
0 - 10 V
4 - 20 mA
1 - 5 V
Max. load resistance of current output
500 Ohm
Min. load resistance of voltage output
20 kOhm
Short-circuit protection
yes
Protocol
IO-Link®
IO-Link®, protocol version
Device V 1.1
IO-Link®, profile
Smart sensor profile
IO-Link®, function classes
Teach channel
Process data variable (PDV)
Identification
Binary data channel (BDC)
Diagnostics
IO-Link®, communication mode
COM2 (38,4 kBd)
IO-Link®, SIO mode support
Yes
IO-Link®, port class
A
IO-Link®, process data width OUT
0 Byte
IO-Link®, process data width IN
2 Byte
IO-Link®, process data content IN
14 bit PDV (pressure measurement)
2 bit BDC (pressure monitoring)
IO-Link®, minimum cycle time
3 ms
IO-Link®, data memory required
500 byte
DC operating voltage range
15 V ... 30 V
Reverse polarity protection
for all electrical connections
Electrical connection
4-pin
Plug
Rectangular design
Type of mounting
Front panel mounting
With wall/surface bracket
With thread
Mounting position
Any
Pneumatic connection
External thread G1/8
Internal thread M5
Product weight
46 g
Housing material
PA-reinforced
Display type
Illuminated LCD
Displayable unit(s)
MPa
bar
inchH2O
inchHg
kPa
psi
kgf/cm²
mmHg
Setting options
IO-Link®
Via display and pushbuttons
Teach-in
Protection against tampering
IO-Link®
PIN code
Threshold value setting range
0 % ... 100 %
Hysteresis setting range
0 % ... 90 %
Degree of protection
IP40
Corrosion resistance class (CRC)
2 - Moderate corrosion stress

Product Support