Hit enter to search or ESC to close

Actuators with feedback

Learn more about Actuators with feedback
Linear actuators with position feedback

Linear actuators with position feedback

Diameter 18, 25, 32, 40, 50, 63, 80, 100 mm

Stroke length 10 ... 2000 mm

Force 153 ... 4712 N

Rotary actuators with position feedback

Rotary actuators with position feedback

Size 25, 40, 63

Swivel angle 0 ... 272°

Mass moment of inertia 0.0015 kgm² ... 0.60 kgm².

Selection Guide

Linear actuators with position feedback

Linear actuators with position feedback are used with Soft Stop, for pneumatic positioning or for measuring tasks. Rodless actuators with feedback: the DGCI offers a very wide range of diameters from 18 mm to 63 mm and stroke lengths from 100 mm to 2,000 mm. Equipped with a high-quality recirculating ball bearing guide, it is often possible to dispense with an additional guide. Equipped with an absolute measuring, digital linear potentiometer, optionally with brake, additional carriage and lubrication adapter.
The DDLI also has diameters from 18 mm to 63 mm and stroke lengths from 100 mm to 2,000 mm, but is without a guide—for use with the customers' own recirculating ball bearing guide. Optionally available with moment compensator DARD for backlash-free load coupling; in addition with contactless absolute measuring linear potentiometer. DNCI/DDPC—they offer diameters from 32 mm to 100 mm and stroke lengths from 100 mm to 750 mm for Soft Stop and pneumatic positioning. Available as a measuring cylinder up to a stroke of 2,000 mm.
They have a contactless incremental linear potentiometer, offer various piston rod variants, a standard cylinder according to ISO 15552, and are optionally available with a guide and clamping unit.

Rotary actuator with position feedback

The DSMI quarter turn actuator with integrated linear potentiometer is identical in design to the pneumatic quarter turn actuator DSM, but is equipped with an absolute measuring linear potentiometer based on a potentiometer.
Swivel angle: 0 … 270°
Size: 25, 40, 63
Max. torque: 5 … 40 Nm

The quarter turn actuator DSMI is used with Soft Stop and pneumatic positioning for mass moments of inertia of 15 ... 6,000 kg/cm².

The advantages are:
Complete drive unit, compact, ready for immediate use, high angular acceleration with adjustable fixed stops for fast and precise positioning up to ±0.2° (only with axis controller CPX-CMAX)