Air preparation combination units

Learn more about Air preparation combination units
MS series

MS series

Size 4, 6, 9

Connection G1/8, G1/4, G3/8, G1/2, G3/4, G1, also available with NPT thread

Pressure 0.3 ... 12 bar

Flow rate 550 ... 14000 l/min

Pressure gauge with bar, psi, MPa

Grade of filtration 0.01 ... 40 µm

Condensate drains

- Manual

- Semi-automatic

- Fully automatic

Plastic bowl with plastic bowl guard

Metal bowl guard

Flow direction

- From left to right

- From right to left

Proportional lubricator.

D series, metal design

D series, metal design

Size MINI, MIDI, MAXI

Connection G1/2, G1/4, G1/8, G3/8, G3/4

Pressure 2.5 ... 12 bar

Flow rate 550 ... 6000 l/min

Condensate drains

- Manual

- Fully automatic

Plastic bowl with metal bowl guard

Direct proportional lubricator

D series, polymer

D series, polymer

Size MINI

Connection G1/8, G1/4

Pressure 0.5 ... 7 bar

Flow rate 400 ... 1200 l/min

Condensate drains

- Manual

- semi-automatic

Plastic bowl without bowl guard

Proportional lubricator

Selection Guide

Series MS

Depending on the application, service units typically consist of a wide variety of functional modules, such as a manual pressurization and exhaust valve, a filter regulator and a branch module. At Festo, the most common combinations in the MS series are available from stock pre-assembled. With the MSB Configurator of the MS series, complex service units can also be individually configured step by step, ideal for any application. These units are completely assembled, pressure-tested and thus delivered ready for installation. As part of the Festo core product range, these individual configurations can also be handled worldwide and are therefore quickly available. They are available in three sizes MS4, MS6 and MS9 for a wide flow rate range. Depending on the configuration, they are suitable for use in potentially explosive areas of zones 1, 2, 21 and 22 as well as with UL approval.

Series D, metal

The most common combinations are also available from stock in the D series, suitable for basic applications. You can choose from three sizes MINI, MIDI and MAXI for a wide flow rate range.

Series D, polymer

In the D series with polymer housing, four distinct configurations can be ordered from stock pre-assembled. One size is available for the simplest applications.