Hit enter to search or ESC to close

Compressed air treatment

Air preparation combination units

Air preparation combination units

Service units for compressed air treatment, consisting of different combinations of units in two series.

Filter regulator lubricator

Filter regulator lubricator

Filter regulator

Air line lubricators

Filter regulators

Filter regulators

Space-saving design with filter and regulator integrated in a single device

Compressed air filters

Compressed air filters

Filters for purifying the compressed air for various quality classes

- Standard filter

- Fine filter

- Micro filter

- Active carbon filter

Compressed air regulator

Compressed air regulator

Pressure regulators for compressed air treatment

- Standard regulator with different pressure regulation ranges

- Precision pressure regulators

- Electrically controlled pressure regulators

- Regulator manifolds

Air line lubricators

Air line lubricators

Air line lubricators for improving the compressed air for pneumatic components.

Shut off valves and soft-start dump valves

Shut off valves and soft-start dump valves

Shut off valves for switching on and exhausting systems.

Soft start valves for gradual pressure build-up.

Air dryers

Air dryers

Adsorption dryer with defined pressure dew point and high flow rate, as well as membrane air dryer with flow rate-dependent pressure dew point.

Compressed air porting block

Compressed air porting block

Branching modules and distributor blocks as an intermediate outlet for different qualities of compressed air.

Condensate drains

Condensate drains

Condensate drain for attaching air preparation units, compressed air networks, systems and for automatic dissipation of condensate formed.

Air boosters

Air boosters

Components for pressure boosting in a partial range of a system.

Pressure gauges

Pressure gauges

Pressure gauges for compressed air treatment.

Accessories for compressed air treatment

Accessories for compressed air treatment

Assembly components

Sub-bases

Safety components

Pressure gauges

Device-specific accessories.

Selection Guide

Selection Guide

Air preparation combination units

The air preparation combination unit ensures the correct compressed air quality and filters compressor oil, condensate and dirt particles from the air. Depending on the application, a service unit consists of a pressure regulator, various filters, a branch module and pressurization and exhaust valves. Various combinations are available and in stock. In addition, service units can be configured individually in the MS modular system.

Filter regulator lubricator

A unit of filter regulator and lubricator is used when the compressed air not only needs to be cleaned but also oiled. The filter regulator removes the condensate and coarse dirt from the compressor, the lubricator supplies a finely dosed quantity of pneumatic lubricating oil.