Hit enter to search or ESC to close

MS series

Learn more about MS series
Size
Pneumatic connection
Pressure regulation range
Selection Guide

Selection Guide

Series MS

MSB4

With the MSB4 configurator, complex service unit combinations in the MS4 size can be configured step by step. All functions of the compressed air preparation of the MS4 series are available in a grid dimension of 40 mm per unit. The threaded connections G1/8" and G1/4" as well via sub-base up to G3/8" can be selected. Depending on the configuration, the standard nominal flow rate at 6 bar control pressure is approx. 1,000 to 1,500 L/min.

MSB6

With the MSB6 configurator, complex service unit combinations in the MS6 size can be configured step by step. All functions of the compressed air preparation of the MS6 series are available in a grid dimension of 62 mm per unit. The threaded connections G1/4", G3/8" and G1/2" as well via sub-base up to G3/4" can be selected. Depending on the configuration, the standard nominal flow rate at 6 bar control pressure is approx. 4,000 to 6,000 L/min.

MSB9

With the MSB9 configurator, complex service unit combinations in the MS9 size can be configured step by step. All functions of the compressed air preparation of the MS9 series are available in a grid dimension of 62 mm per unit. It can be selected as a module without connection thread and with the direct sub-bases G3/4", G1" as well as NPT3/4" and NPT1". Also available up to G1 ½" and NPT 1 ½" via separate sub-bases. Depending on the configuration, the standard nominal flow rate at 6 bar control pressure is approx. 15,000 to 20,000 L/min.

MSE6

The new energy efficiency module reduces any avoidable waste of compressed air and starts where it occurs most frequently. Active intervention in the supply, especially during the standby times of a system, reduces compressed air consumption. The automatic monitoring of important operating parameters of the system such as flow rate and pressure simultaneously guarantees a reliable production process. In addition to the use in new energy-efficient machines, the simple connection of the sensors to the machine control also enables uncomplicated retrofitting of older systems that are to operate more energy-efficiently.

MSB4N

With the MSB4N configurator, complex service unit combinations in the MS4 size can be configured step by step. All functions of the compressed air preparation of the MS4 series are available in a grid dimension of 40 mm per unit. The threaded connections NPT1/8" and NPT1/4" as well via sub-base up to NPT3/8" can be selected. Depending on the configuration, the standard nominal flow rate at 6 bar control pressure is approx. 1,000 to 1,500 L/min.

MSB6N

With the MSB6N configurator, complex service unit combinations in the MS6 size can be configured step by step. All functions of the compressed air preparation of the MS6 series are available in a grid dimension of 62 mm per unit. The threaded connections NPT1/4", NPT3/8" and NPT1/2" as well via sub-base up to NPT3/4" can be selected. Depending on the configuration, the standard nominal flow rate at 6 bar control pressure is approx. 4,000 to 6,000 L/min.