Hit enter to search or ESC to close

Controllers for stepper motors

Learn more about Controllers for stepper motors
Selection Guide

Selection Guide

Motor controller CMMO-ST

The 24 VDC stepper controller CMMO-ST offers a simple and inexpensive way to realize electrical movements.
Thanks to the uniform FHPP communication protocol, the stepper controller can be controlled almost identically on all PLCs.

Motor controller CMMS-ST

The 48 VDC stepper controller CMMS-ST offers a simple and inexpensive way to realize electrical movements.
Thanks to the uniform FHPP communication protocol, the stepper controller can be controlled almost identically on all PLCs.

Motor controller CMXH-ST2

The 48 VDC stepper controller CMXH-ST2 offers a special possibility to control parallel kinematic planar surface gantries of the EXCM series with two fixed stepper motors and an H-shaped toothed belt all round. Since the motors in this form of kinematics are not directly assigned to an axis (X or Y-axis), the transformation and position calculation required for this is carried out automatically in the motor controller in order to guarantee the greatest possible comfort for the user.
Thanks to the uniform FHPP communication protocol, the motor controller can be controlled almost identically on all PLCs.