Look for the star when selecting products in the catalog.
For more than 2200 products worldwide: always in stock, attractively priced, delivered quickly.
Release list for Audi Neckarsulm – assembly line
A release list was created together with Audi in Neckarsulm. It contains all the Festo products that can be used in the assembly line at the Neckarsulm plant.
The technical assembly department at Audi is the point of contact for the Audi NSU assembly release list for Festo mechanical components. A copy of the release list can be obtained from this department.
Release lists for unit production Audi Györ and Ingolstadt
The VW release lists for component production are valid for unit production at the Györ and Ingolstadt plants. These were created in cooperation with Audi, Skoda and Volkswagen and are based on the up-to-date specifications for mechanical systems for component production of the Volkswagen Group.
Release list for mechanical and pneumatic systems (PDF)
Release list for electromechanical drive technology (PDF)
Click here to download the circuit diagrams for the service modules (see Section 3.6.11 in the release list):
Circuit diagrams for maintenance modules unit production (DXF format)
Product data sheets for the Audi release list
The product data sheets have been created based on the Audi AG release list of electric components.
These data sheets apply to automation technology in the body shop, paint shop and assembly line at the plants in Ingolstadt, Neckarsulm and Brussels.
If you have any queries, please get in touch with your contact person at Festo:
Axel Flak
Sebastian Wörner
Release list for Autoliv Vårgårda – Sweden
The release list contains all components approved for Autoliv projects with links to documents and other information in the Festo catalogue.
Release lists for the Bentley Crewe plant
This project manual applies to the Bentley Crewe plant. It was created together with Bentley and is based on the current requirements specification.
If you have any queries, please get in touch with your contact person at Festo:
Axel Flak
Sebastian Wörner
Festo is proud to be a Best Practice Partner for all global BMW projects.
For this purpose, the BMW technology divisions and Festo have jointly created globally valid release lists or project books for standardization in order to support general contractors, plant and machine manufacturers (SE partners) in the selection of suitable and approved products.
Body shop (TKB)
Globally valid release list according to BMW standard V7, V8x for the body shop field of technology:
BMW release list for the body shop (PDF)
VTSA-F-FB valve terminal configurator according to BMW standard V7, V8x for the body shop field of technology:
Valve terminal configurator (XLS)
Cross-technology standard TA/TEM/TMO/MT-5x/TFO
Component manual
Valid for the following BMW technologies:
Driveline (TA), Power Module (TEM), Assembly (TMO), Chassis Driveline (MT-5x), Foundry (TFO).
Attention: The technology-specific releases of the BMW ADM (ArticleDataManager) must be observed!
Project participants receive information about the latest projects and regulations on the corresponding digital B2B platforms of the BMW Group.
Special approvals are possible in exceptional cases in consultation with the BMW project manager.
Valve terminal configurator (XLS)
Drive train (TA-, MT-5x)
Only valid for existing installations and integrations. For new systems (GEN 6), the BMW Component Manual V1.1TA/TEM/TMO/MT5x/TFO applies - see above
The release list of the Powertrain Technology Division for the BMW plants: Munich, Dingolfing, Landshut, Regensburg, Berlin, Leipzig (Germany) as well as Steyr (Austria), Hams Hall (Great Britain) and Shenyang (China).
BMW release list for the powertrain (PDF)
Project participants receive information about the latest projects and regulations on the corresponding digital B2B platforms of the BMW Group.
Special approvals are possible in exceptional cases in consultation with the BMW project manager.
If you have further questions or require support, please get in touch with the BMW team at Festo:
Ronny Dentler
Hilmar Klee
Dietmar Düll
Worldwide release list of Festo components for Brose plants
The release list contains all the generally approved components and configurations for pneumatic and electric automation technology.
Special approvals are possible in exceptional cases in consultation with the Brose project manager.
Scope of validity: worldwide for all Brose locations
The specification is used for all new purchases, conversions and extensions.
CNH-FPT Industrial project manual
CNH-FPT INDUSTRIAL and Festo have created a global project manual for powertrain projects to help machine and system builders to select suitable and approved products.
Both the specifications of CNH-FPT INDUSTRIAL and the global standards have been taken into account.
The Festo project manual complements CNH-FPT INDUSTRIAL's specifications and specifies the components that can be used to build machines and systems within the scope of powertrain projects.
CNH-FPT Industrial project manual cover page (PDF in English)
Release list for DAF
Together with DAF Eindhoven, we have created a release list of standard components. It contains all the approved Festo products for automation in the body shop, the paint shop, final assembly and engine production in Eindhoven (NL) and Westerlo (BE). The approval of components not included on this list is subject to consultation with the respective DAF N.V. engineers.
Festo is a project partner of Daimler in the INTEGRA 5 and INTEGRA 6 standardization lines in their car body plants worldwide. Daimler and Festo have created joint global project manuals for the INTEGRA standardization lines and the powertrain in order to help system and machine builders to select suitable and approved products.
Project participants receive information about the latest projects and regulations on the corresponding digital platforms from Daimler:
That is also where you can find all the latest release lists, project manuals and valve terminal configurators from Festo. The release lists and project manuals specify the components that can be used in the individual projects for building the specific machines and systems.
If you have any further questions, please contact:
Ivica Dujmovic(ivica.dujmovic@festo.com)
Carina Armbruster(carina.armbruster@festo.com)
Project manuals for FCA powertrain projects
FCA and Festo have created joint global project manuals for powertrain projects in order to help system and machine builders to select suitable and approved products.
Both the specifications of FCA and the global standards have been taken into account.
The Festo project manual for FCA powertrain projects complements FCA’s specifications and specifies the components that can be used to build machines and systems within the scope of powertrain projects.
Project manual for FCA powertrain projects in Europe, Latin America and Asia:
FCA (FCA EMEA, LATAM, APAC) Festo project manual (PDF in English)
FCA (EMEA, LATAM, APAC) Festo cover page (XLS in English)
FCA Festo CPX-VTSA valve terminal configurator (XLS in English)
Example of bypass for assembly stations (PDF in English)
Example of actuating cylinders (PDF in English)
Project manual for FCA powertrain projects in North America (NAFTA):
Ford Motor Company is one of the largest car manufacturers in the world and one of Festo's most important customers. Ford's size and global presence has led Festo to establish a Ford Customer Team that will support all Ford plants worldwide as well as machine and plant builders on projects.
Ford Customer Team
For questions about current Ford projects or other topics, please contact Alexander Kluge.
Project manuals
For most Ford projects, Festo has created project manuals that describe the current status of the released components. In addition, the project manuals are an aid to planners and engineers in the design of new machinery and equipment for the Ford Motor Company.
Project manuals are available for these projects, among others. Please get in touch with your local Festo contact person.
Valencia plant (Spain) - project CX482 (Kuga)
Craiova plant (Romania) - project BX726 (B-CUV)
Plant - Cologne and Saarlouis - projects B479 (Fiesta) and C519 (Focus)
Plant: Thailand, South Africa and South America - projects P703 and U704
Ford final assembly
Global powertrain specification
Festo is the preferred component manufacturer for all Ford global powertrain projects. The global list of approved components for Ford powertrain projects is available on the Ford Covisint platform. You can also download the Festo project manual from there.
If you have further questions or you need support, please contact the Ford Customer Team at Festo.
General Motors operates two joint ventures in China.
1. SAIC General Motors Corporation Limited (SAIC-GM or 'SGM')
2. SAIC General Motors-Wuling (SAIC-GM-Wuling or 'SGMW')
SAIC General Motors-Wuling (SAIC-GM-Wuling or 'SGMW') SAIC-GM-Wuling is a joint venture between SAIC Motor, General Motors and Liuzhou. Wuling Motors Co Ltd. manufactures commercial and private vehicles that are sold under the brand names Wuling and Baojun. SGMW is a major manufacturer of mass-produced products in the domestic Chinese market and one of the largest manufacturers of microvans in China.
Festo is proud to be a Preferred Supplier Partner for all global JLR projects.
JLR and Festo have created joint global project manuals for JLR projects to help system and plant builders select suitable and approved products.
If you have further questions or you need support, please contact the JLR Team at Festo:
Jlrenquiries.gb@festo.com
List of approved components for JLR projects
This document provides an indication of the product families approved for use. Any deviation from this must be approved in writing by JLR Standards and Controls.
Festo list of preferred products (PDF)
JLR Project Manual
This document is intended to help plant and system engineers meet JLR requirements.
VTSA-FB valve terminal configurator
This Excel tool is designed to help plant and system engineers specify a valve terminal configuration.
Valve terminal configurator (ZIP)
Guides for easy product commissioning
Easy-to-use instructions for commissioning and replacing products.
OVEM vacuum generator Easy setup guide (PDF)
SFAM Flow meter for BIW (PDF)
SFAM Flow Meter for the Power Train (PDF)
Customized solutions: CAD and datasheets
CAD models and datasheets for non-catalog products
MS9 Zone Stand Large – datasheet (PDF)
MS9 Zone Stand Large – CAD (ZIP)
MS6 Zone Stand Small – datasheet (PDF)
MS6 Zone Stand Small – CAD (ZIP)
Preferred product list for Magna Powertrain ILZ
This preferred product list was created in cooperation with Magna Powertrain ILZ. The approvals apply to the ILZ plant.
Preferred product list for Magna Powertrain ILZ (PDF)
Preferred product list for Magna Steyr for the G30, X 540, X 590, MOPF, GJ29 projects
This preferred product list was created in cooperation with Magna Steyr Fahrzeugtechnik Graz for the body shop. The approvals apply to the body shop at the Graz plant for the G30, X 540, X 590, MOPF, and GJ29 projects as well as subsequent projects.
Preferred product list Magna Steyr Fahrzeugtechnik body-in-white version 1.11 (PDF)
In addition, there are two configurators for the valve terminal type 45 (CPX-VTSA-F) (1x bus node FB44 Profinet RJ45 for new systems with TIA Portal, 1x bus node FB45 SCRJ for integration in S7 systems) which make it easier for you to configure the valve terminal (version 1.4).
Valve terminal configurator CPX VTSA-F (integration in S7 systems)
Valve terminal configurator CPX VTSA-F (new systems TIA Portal)
Release lists for engine production by MAN Truck & Bus in Nuremberg (production department)
You can find the release lists for projects for the MAN Truck & Bus engine plant in Nuremberg, including links and other relevant information, here.
Release list for MAN Truck & Bus Nürnberg (PDF)
If you have any queries, please get in touch with your contact person at Festo:
Sebastian Helf
Sebastian Wörner
PCD
Electrical Automation Solutions
Pneumatic Automation Solutions Body Shop
OV
Release list for area modules
A project manual was prepared for the modules area (engine assembly & axle assembly) in Zuffenhausen in cooperation with Porsche.
Porsche Project Manual modules
CPX/MPA valve terminal configurator
There are corresponding release lists and valve terminal configurators for the other areas. These documents are available on request.
If you have any queries, please get in touch with your contact person at Festo:
Axel Flak
Sebastian Wörner
Have you worked for the Renault Group?
Festo has worked closely with Renault to select the right components in the pneumatic systems and also in the motion controllers for e-drives based on the stated Renault requirements:
Please ask your local contact at Festo for assistance in preparing an offer or for project engineering.
Quickly making the right selection saves money!
Global overview of Festo products requested by Renault Group 2021(PDF in English)
During the Renault project, Festo supports all Renault teams and partnerships in creating the RFQ/engineering with the "Global Overview", as well as with the "Renault Project Synthesis Book", which was created specifically for the ongoing Renault project.
The "Global Overview..." contains Your contact at Festo to receive the "Document of Synthesis for Renault project XXX".
Many applications that have already been undertaken with Renault are standardized, for example air unit panels, e-drive applications, to reduce the development time and risks in your project: do not hesitate and call Festo!
As a part of the TRATON Group (formerly Volkswagen Truck & Bus), SCANIA is one of Festo’s key global customers. SCANIA manufactures heavy trucks and buses at its main locations in Europe and South America. Festo supports SCANIA AB globally with its SCANIA Customer Team, both at its local plants and with new projects.
SCANIA Customer Team
For questions about ongoing SCANIA projects or other topics, please get in touch with your Festo contacts.
Project manuals
Festo has created project manuals for SCANIA projects. These project manuals contain information on the current specification status and other additional functions that may be of help when designing systems for SCANIA AB.
SCANIA Oskarsham (SE) and SCANIA Sao Bernardo (BR)
Cab production:Scania CV Specification BiW (PDF in English)
SCANIA New Foundry Södertälje
A project manual has been created for the “New Foundry” project in Södertälje: Project manual "New Foundry"
If you have any queries, please get in touch with your contact person at Festo:
VW release lists for component production
These release lists were created in cooperation with Audi, Skoda and Volkswagen and are based on the up-to-date specifications for mechanical systems for component production of the Volkswagen Group.
Release list for mechanical and pneumatic systems (PDF)
Release list for electromechanical drive technology (PDF)
Release list Battery Mechanics / Battery Cell Production (PDF)
Click here to download the circuit diagrams for the service modules (see Section 3.6.11 in the release list for mechanical and pneumatic systems):
Circuit diagrams for service units for engine production at Volkswagen (DXF format)
VW release list BV 1.13 body shop
Release list BV 1.13 including warehouse 30 body shop (ZIP)
Volkswagen Hanover: service modules in the press shop
A number of service modules have been defined and approved in collaboration with the press shop at the Volkswagen plant in Hanover.
Release list for service modules, VW Hanover press shop (PDF)
If you have any queries, please get in touch with your contact person at Festo:
Sebastian Wörner
Sebastian Helf
Thorsten Bruns
Release list for Volvo Cars AB, engine plants
The release list for all Volvo Cars AB, engine plants with links to documentation, CAD data and all other information from the Festo catalog can be found here.
This release list applies to projects at the Skövde and Floby plants and encompasses all products from Festo that are approved for use in Volvo Cars plants in Sweden.
Release list Volvo Cars, Skövde plant (PDF in English)
Release list for Volvo Cars worldwide
Please contact Festo for the latest release lists for the individual plants.
We created an easy set-up guide for the vacuum generator OVEM:
Release list for Volvo Powertrain Sweden
The release list for all Volvo Powertrain Sweden projects with links to documentation, CAD data and other information from the Festo catalog can be found here.
The release list is valid for all Volvo Powertrain Sweden projects and includes all Festo products approved for use at the Volvo Powertrain plants in Sweden.