Ball screw drive

• Ball screw drive (tolerance class G7 according to DIN 69 051)
• Life-time lubrication thanks to micro grease reservoir
• Three ball screw pitches per size possible
• Repetition accuracy better than ± 0.015 mm (± 2 s)

Anti-twist protection

The piston rod is secured against torsion

Venting hole

• Standard venting hole closed with sinter disk pressed in
• Option S1 (IP65); venting hole with G1/8“ threaded hole
• Fittings as accessories

With this measure, we ensure the "venting" of the cylinder through a defined opening. This leads to optimal running characteristics.

Sizes and versions

• Six sizes (32, 40, 50, 63, 80 and 100)
• Three ball screw pitches per size possible
• Max. stroke for size 63: 1200 mm
• Max. stroke for sizes 80 and 100: 1500 mm
• CleanLook – smooth surfaces
• Protection class: up to IP65
• Corrosion resistance: up to CRC3
• Option: food-approved lubrication of the piston rod and seal

Suitable for food industry applications in the splash area

Variants of the piston rod

• Piston rod with male thread – standard, optional with female thread
• Piston rod extension – optional

Parallel motor attachment

• Parallel attachment with kit EAMM-U
• Different motor sizes possible per axis size
• Combination of motor and gear unit possible
• Third-party motors possible
• Kits EAMM-A compressed according to IP65 available in version S1

Axial motor attachment

• Axial attachment with kit EAMM-A
• Different motor sizes possible per axis size
• Combination of motor and gear unit possible
• Third-party motors possible
• Kits EAMM-A compressed according to IP65 available in version S1

Sensor rail

50 und 100 mm (adhesive) sensor rails can be attached to the actuator for flexible sensor assembly.

Mounting kit sensor

Sensor mounting kit with (adhesive) food approval that can be attached to the actuator for flexible sensor assembly.

Mounting accessories for piston rod

Example from the range of accessories

Mounting accessories for housing

Example from the range of accessories

Guide unit EAGF-V2-KF

• Guide unit for recirculating ball bearing guide
• Fixed stroke lengths: 100, 200, 300 and 400 mm

Bellows kit EADB-V2

• Bellows kit EADB-V2 available for ESBF sizes 63 and 80
• Piston rod extension is required

Ground/foot mounting

• Profile mounting EAHF
• The number of EAHFs required depends on the max. feed force

Flange mounting EAHH

Flange mounting EAHH-V2, stainless steel

Swivel mounting kit ZNCM

Movable swivel mounting kit for easy mounting