Hit enter to search or ESC to close

Proportional directional control valve VPWP-10-L-5-Q-10-E-G-EX1

Based on the technology of the valve MPVE, VPWP allows the direction of movement to be varied. Reliable: the integrated interface for digitalized data transmission. In servo-pneumatic applications, VPWP is nearly always combined with a controller CMAX.
VPWP-10-L-5-Q-10-E-G-EX1 Part no.  1552544
  • Controlled piston spool valve
  • Digital actuation
  • Integrated pressure sensors for monitoring function and force control
  • With auto identification
  • Diagnostic function
  • Integrated digital output, e.g. for a clamping/brake unit
  • Suitable for servo-pneumatic applications with stepping motor driver CPX-CMAX and end-position controller CPX-CMPX
Select basic features

Pieces
Calculate delivery date
Configure your product
Close Technical Data
Show Technical Data
Nominal width
10 mm
Type code
VPWP
Actuation type
Electrical
Sealing principle
Hard
Mounting position
Preferably horizontal (display elements facing upwards); if the pneumatic valve is moved, it must be mounted at right angles to the direction of movement
Any
Design
with integrated pressure sensors
Piston gate valve
Reset method
Magnetic spring
Safety instructions
VPWP safety position: the blocked mid-position is approached in case of a control interface malfunction.
Type of control
Direct
Flow direction
Non-reversible
Symbol
00992136
Valve function
5/3 proportional directional control valve, closed
Status indications
LED yellow = PL (power load)
LED green = power
LED red = error
Operating pressure
0 bar ... 10 bar
Operating pressure for positioning/soft stop
4 bar ... 8 bar
Nominal operating pressure
6 bar
Standard nominal flow rate
2000 l/min
Nominal operating voltage DC
24 V
DC operating voltage range
18 V ... 30 V
Load voltage range DC
18 V ... 30 V
Max. load current of the digital output
500 mA
Max. load current at voltage output
500 mA
Max. current consumption, valve drive
1.2 A
Logic max. current consumption
0.15 A
Nominal voltage DC
24 V
Supply voltage of the digital output
24 V load voltage
Supply voltage of the voltage output
24 V load voltage
ATEX category gas
II 3G
Type of ignition protection for gas
Ex nA IIC T5 X Gc
Explosive ambient temperature
0°C <= Ta <= +50°C
Explosion prevention and protection
Zone 2 (ATEX)
Operating medium
Compressed air as per ISO 8573-1:2010 [6:4:4]
Information on operating and pilot media
Operation with oil lubrication not possible
CE marking (see declaration of conformity)
as per EU explosion protection directive (ATEX)
As per EU EMC directive
Corrosion resistance class (CRC)
1 - Low corrosion stress
Temperature of medium
0 °C ... 50 °C
Degree of protection
In mounted state
IP65
Ambient temperature
0 °C ... 50 °C
Certification
RCM compliance mark
Product weight
1010 g
Pressure resolution
0.01 bar
Linearity error FS
< 1.5 %
Repetition accuracy FS
< 1 %
Design of the 24 V voltage output
Reverse supply without destruction
No galvanic isolation
Short circuit-proof
Reverse supply without destruction
Digital output design
Short circuit-proof
as per IEC 61131-2
No galvanic isolation
Reverse supply without destruction
Positive logic (PNP)
Control interface
Terminating resistor integrated
Digital
CAN bus with Festo protocol
Fieldbus interface electrical connection IN
5-pin
Plug
M9
Fieldbus interface electrical connection OUT
M9
5-pin
Socket
Fieldbus interface electrical connection
4-pin
M8
Socket
Type of mounting
With through-hole
With accessories
Color of connections
Connection 4: black
Connection 2: blue
Pneumatic connection 1
G3/8
Pneumatic connection 2
G3/8
Pneumatic connection 3
G3/8
Pneumatic connection 4
G3/8
Pneumatic connection 5
G3/8
Note on materials
RoHS-compliant
Cover material
PA-reinforced
Housing material
Wrought aluminum alloy
Anodized

Product Support