Look for the star when selecting products in the catalogue.
For more than 2,200 products worldwide: always in stock, attractively priced and delivered quickly
List of approved components for Audi Neckarsulm – assembly line
A list of approved components was created together with Audi in Neckarsulm. It contains all the Festo products that can be used on the assembly line at the Neckarsulm plant.
The technical assembly department at Audi is the point of contact for the Audi NSU assembly list of approved Festo mechanical components. A copy of the list can be obtained from this department.
List of approved components for aggregate production at Audi’s Györ and Ingolstadt plants
The list of approved components for the Györ and Ingolstadt plants has been withdrawn and these two plants have been included in the 'List of approved components for KLH mechanical aggregate production’.
List of approved Festo components (PDF)
VW list of approved components for electric drive technology
This list of approved components was created in cooperation with Volkswagen and Audi and applies to the Volkswagen Group's production of engines, gear boxes, chassis and to its foundry.
The components on this list are only approved after consultation with the specialist department.
List of approved components for electric drive technology (PDF)
Product data sheets for the Audi list of approved electric components
The product data sheets have been created based on the Audi AG list of approved electric components.
These data sheets apply to automation technology in the body shop, paint shop and on the assembly line at the plants in Ingolstadt, Neckarsulm and Brussels.
List of approved components for Autoliv Vårgårda – Sweden
The list of approved components contains all components approved for Autoliv projects with links to documents and other information in the Festo catalogue.
List of approved components for body manufacture (TKB)
Together with BMW, a list of approved components was drawn up for the body shop technology area. This list of approved components can be downloaded from BWM’s B2B platform.
BMW list of approved components for the body shop (PDF)
List of approved components for assembly (TMO):
Together with BMW, a list of approved components was created for the assembly technology area. The approvals apply to the Munich, Dingolfing, Regensburg, Leipzig (Germany); Araquari (Brazil); Oxford (Great Britain); Spartanburg (United States); Rosslyn (South Africa); Shenyang (China); and San Luis Potosi (Mexico) plants.
List of approved components for BMW assembly (PDF)
List of approved drive train components
Together with BMW, a list of approved components was drawn up for the drive train technology area.
The approvals apply to the Munich, Dingolfing, Landshut, Regensburg, Berlin (Germany) as well as the Steyr (Austria), Hams Hall (Great Britain) and Shenyang (China) plants.
Worldwide list of approved Festo components for Brose plants
The list of approved components contains all the generally approved components and configurations for pneumatic and electric automation technology.
Special approvals are possible in exceptional cases in consultation with the project manager at Brose.
Scope of validity: worldwide for all Brose locations
The specification is used for all new purchases, conversions and extensions.
CNH-FPT Industrial project manual
CNH-FPT Industrial and Festo have created a global project manual for power train projects to help machine and system builders to select suitable and approved products.
Both the specifications of CNH-FPT INDUSTRIAL and the global standards have been taken into account.
The Festo project manual complements CNH-FPT Industrial’s specifications and specifies the components that can be used to build machines and systems within the scope of power train projects.
CNH-FPT Industrial project manual cover page (PDF in English)
List of approved components for DAF
Together with DAF Eindhoven, we created a list of approved standard components. It contains all the approved Festo products for automation in the body shop, the paint shop, final assembly and engine production in Eindhoven (NL) and Westerlo (BE). The approval of components not included on this list is subject to consultation with the respective engineers at DAF N.V.
Festo is a project partner of Daimler in the INTEGRA 5 and INTEGRA 6 standardisation lines in their car body plants worldwide. Daimler and Festo have created joint global project manuals for the INTEGRA standardisation lines and power train in order to help system and machine builders to select suitable and approved products.
Project participants receive information about the latest projects and regulations on the corresponding digital platforms from Daimler:
That is also where you can find all the latest lists of approved components, project manuals and valve terminal configurators from Festo. The lists of approved components and project manuals specify the components that can be used in the individual projects for building the specific machines and systems.
If you have any further questions, please contact:
Günther Holzapfel (guenther.holzapfel@festo.com)
Ivica Dujmovic (ivica.dujmovic@festo.com)
Stefan Krombach (stefan.krombach@festo.com)
Project manuals for FCA power train projects
FCA and Festo have created joint global project manuals for power train projects in order to help system and machine builders to select suitable and approved products.
Both the specifications of FCA and the global standards have been taken into account.
The Festo project manual for FCA power train projects complements FCA’s specifications and specifies the components that can be used to build machines and systems within the scope of power train projects.
Project manual for FCA power train projects in Europe, Latin America and Asia:
FCA (FCA EMEA, LATAM, APAC) Festo project manual (PDF in English)
FCA (EMEA, LATAM, APAC) Festo cover page (PDF in English)
FCA Festo CPX-VTSA valve terminal configurator (PDF in English)
Example of bypass for assembly stations (PDF in English)
Example of actuating cylinders (PDF in English)
Project manual for FCA power train projects in North America (NAFTA):
The Ford Motor Company is one of the largest automotive manufacturers in the world and one of Festo’s key customers. The size and global presence of Ford has led Festo to set up a Ford Customer Team that will support all Ford plants worldwide as well as the machine and system builders during projects.
Ford Customer Team
For questions about current Ford projects or other issues, please get in touch with your Festo contacts.
Project manuals
For most Ford projects, Festo has created project manuals that describe the current status of approved components. In addition, the project manuals provide help for planners and engineers when designing new machines and systems for the Ford Motor Company.
Ford assembly plant – Valencia (Spain)
The body shop: Valencia – component list (PDF)
Ford assembly plant – Craiova (Romania)
The body shop: Craiova – component list (PDF)
Ford assembly plant – Cologne
The body shop: Cologne – component list (PDF)
Ford assembly plant – Saarlouis
The body shop: Saarlouis – component list (PDF)
Global power train specification
Festo is the preferred component manufacturer for all of Ford’s global power train projects. The global list of approved components for Ford power train projects is available on the Ford Covisint platform. You can also download the Festo project manual from there.
If you have further questions or require support, please get in touch with the Ford Customer Team at Festo.
General Motors operates two joint ventures in China.
SAIC General Motors Corporation Limited (SAIC-GM or ‘SGM’)
SAIC-GM manufactures and sells the automotive brands Chevrolet, Buick and Cadillac in Greater China. SAIC-GM was founded in 1997 with a 50% investment by each partner.
Together, we created a project manual for the SAIC-GM power train
In addition, we have created a project manual for the SAIC-GM battery assembly
SAIC General Motors-Wuling (SAIC-GM-Wuling or ‘SGMW’)
SAIC-GM-Wuling is a joint venture between SAIC Motor, General Motors and Liuzhou Wuling Motors Co Ltd. that produces commercial and private vehicles sold in China under the brands Wuling and Baojun. SGMW is a major manufacturer of mass-produced products in the domestic Chinese market and one of the largest manufacturers of microvans in China.
We created a project manual for the SGMW power train
List of preferred products for Magna Powertrain ILZ
This preferred product list was created in cooperation with Magna Powertrain ILZ. The approvals apply to the ILZ plant.
List of preferred products for Magna Powertrain ILZ (PDF)
Preferred product list for Magna Steyr for the G30, X 540, X 590, MOPF, and GJ29 projects
This preferred product list was created in cooperation with Magna Steyr Fahrzeugtechnik Graz for the body shop. The approvals apply to the body shop at the Graz plant for the G30, X 540, X 590, MOPF, and GJ29 projects as well as subsequent projects.
Preferred product list for Magna Steyr Fahrzeugtechnik – body shop version 1.11 (PDF)
There is also a configurator for the valve terminal type 45 (CPX VTSA-F), which makes it easier for you to configure the valve terminal. (Version 1.2)
List of approved components for engine production by MAN Truck & Bus in Nuremberg (production department)
You can find the list of approved components for projects for the MAN Truck & Bus engine plant in Nuremberg, including links and other relevant information, here.
List of approved components for MAN Truck & Bus, Nuremberg (PDF)
Please contact Stellantis (PSA / OV) for the latest versions of the project books.
Porsche PO68x, PO51x, PO45x projects (body manufacture)
A list of approved components and a valve terminal configurator are available for this project. These documents are available on request.
List of suggestions for the Renault Group
These documents are applicable to all current and future worldwide Renault Group projects.
The lists of approved components called CNOMO were created by Renault for the pneumatic and electric components for all departments:
The aim of these catalogues is to reduce the time it takes to select products and to ensure that Renault accepts the selected Festo products.
Quickly making the right selection saves money!
Global list of approved components (PDF in English)
Valve terminal configuration
To create your valve terminal configuration, we have created a simple configurator that generates the Festo reference.
The CPX-VTSA can be used for applications:
Festo valves terminal easy software tool for RENAULT 2017 (English)
Standard Jigbox application
Festo devices for Jigbox V.2016 (English)
For most Renault Nissan projects, there is a document entitled ‘Document of Synthesis for Renault Projects’ created by Renault Nissan Maintenance and Development that defines the use of the valve terminal and maintenance units.
As a part of the TRATON Group (formerly Volkswagen Truck & Bus), SCANIA is one of Festo’s key global customers. SCANIA manufactures heavy trucks and buses at its main locations in Europe and South America. Festo supports SCANIA AB globally with its SCANIA Customer Team, both at its local plants and with new projects.
SCANIA Customer Team
For questions about ongoing SCANIA projects or other topics, please get in touch with your Festo contacts.
Global Key Account Manager: Joachim Werner
International Project Support: Thorsten Weiß
Project manuals
Festo has created a project manual for SCANIA cab production projects (body manufacture). This project manual contains information on the current specification status and other additional functions that may be of help when designing systems for SCANIA AB.
SCANIA Oskarsham (SE) and SCANIA Sao Bernardo (BR)
Cab production:
List of approved components for VW based on the group specification for mechanical aggregate production
This list of approved components was created in cooperation with Volkswagen, Skoda and Audi and is based on the specification for mechanical aggregate production of the Volkswagen group issued on 01.01.2016.
The list applies to all machines in the production areas of the plants producing aggregates.
List of approved Festo components (PDF)
Click here to download the circuit diagrams for the service modules (see Section 3.6.11 in the list of approved components).
Circuit diagrams for service units for aggregate production at Volkswagen (DXF format)
VW list of approved components for electric drive technology
This list of approved components was created in cooperation with Volkswagen and Audi and applies to the Volkswagen Group's production of engines, gear boxes, chassis and to its foundry.
The components on this list are only approved after consultation with the specialist department.
List of approved components for electric drive technology (PDF)
VW list of approved components BV 1.13 body shop
List of approved components BV 1.13 including warehouse 30 body shop (PDF)
Volkswagen Hanover: service modules in the press shop
A number of service modules have been defined and approved in collaboration with the press shop at the Volkswagen plant in Hanover.
List of approved components for service modules, VW Hanover press shop (PDF)
List of approved components for Volvo Cars AB, Motorenwerke
Here you will find the list of approved components for all Volvo Cars AB, engine plants with links to documentation, CAD data and all other information from the Festo catalogue.
This list of approved components applies to projects at the Skövde and Floby plants and encompasses all products from Festo that are approved for use in Volvo Cars plants in Sweden.
List of approved components for Volvo Cars, Skövde plant (PDF in English)
List of approved components for Volvo Cars worldwide
Please contact Festo for the latest lists of approved components for the individual plants.
We created an easy set-up guide for the vacuum generator OVEM:
List of approved components for Volvo Powertrain Sweden
Click here for the list of approved components for all Volvo Powertrain Sweden projects with links to documentation, CAD data and other information from the Festo catalogue.
The list of approved components applies to all Volvo Powertrain Sweden projects and includes all Festo products approved for use at the Volvo Powertrain plants in Sweden.