• Excellent rigidity
• Guide has exceptional load bearing capacity
• Lightweight
• Precise and smooth, virtually vibration-free slide movement over the entire stroke range up to 2.5 m
• Possible to use a smaller size for lower weight, smaller installation spaces, reduced costs
• Virtually vibration-free and very smooth slide movement
• High speeds over the entire stroke range up to 8.5 m
• Very long service life

• Magnetic belt deflection without components causing abrasion on the outside
• Clean surface, no abrasion on the outside
• Minimised particle emission for use in cleanrooms
• Reduced ingress of dirt in harsh ambient conditions

Standard (ELGD-TB): square profile cross-section with optimised design

Wide (ELGD-TB-WD): reduced profile height for smaller installation spaces and more compact handling systems

• High torsional rigidity with lower weight and reduced costs
• 30% lighter, while rigidity and load capacity are still similar to the axis with standard profile width
• Overall height reduced by 30%, but feed forces nevertheless similar to the axis with a standard profile height

• Long slide and second freely movable slide
• For higher axial and lateral torques and higher loads
• Additional mounting options
• Longer service life thanks to a second slide that allows the guide load to be distributed

Application example with second slide: simple and flexible dual pick-and-place solution

• Very compact design with two independently moving both Z-axes
• Long Z-axis guide for excellent rigidity, even at high speeds and loads

• Optimised force flow and torque absorption
• Excellent rigidity
• Long strokes of up to max. 8.5 m

• Freely selectable at two positions at the end of the axis
• Motor with cable connection can be mounted 4 x 90° around its own axis
• Its position can be changed at any time
• Define a standard mounting version with a part number and change it to a different position at a later date, as and when needed

• Polyurethane (PU2) with fabric sheath for a long service life and higher resistance to cooling and lubricating fluids. Steel cord tension members enable high forces to be transmitted and also allow the axis to be dynamically controlled
• Polyurethane (PU1) without sheathing, but with a steel tension member for applications in the food zone

• Inductive proximity sensor SIES8M as NC/NO with switching output PNP and NPN, and degree of protection IP67
• Easy to mount up to 2 sensors in the profile slot without needing additional mounting components
• Flush mounting without interfering edges outside the drive cross-section
• Sensors can easily be added or repositioned at a later date