17 → festo.com/didactic Analog Technology TP 1024 The Analog Technology set of components extends the equipment sets TP 1011 and TP 1011 M with analog technology components. It provides information on the structure, function, and behavior of operational amplifiers and their application in different circuits. The students set up complete, fully functional circuits by means of an EduTrainer patch panel and the components from TP 1011 or TP 1011 M. This enables the students to acquire the skills required to recognize the properties and characteristics of operational amplifiers and use them in analog circuits. Symbols and component values are printed on the top of the components. The housing of the set of components can be opened to renew the components in the event of a malfunction. The components are installed on a patch panel with a 19 mm grid. Motor Vehicle Mechatronics TP 1025 The students set up simple motor vehicle-specific basic circuits using an EduTrainer patch panel and the components from TP 1011 or TP 1011 M. Guided by action-oriented learning scenarios, they identify and eliminate malfunctions. Symbols and component values are printed on the top of the components. The housing of the set of components can be opened to renew the components in the event of a malfunction. The components are installed on a patch panel with a 19 mm grid. Built-in fault switches can be used to selectively manipulate components to enable realistic troubleshooting in the circuits. All components are included in the electrical engineering library of FluidSIM. This library also contains extensive teaching material, adapted to the first year of training of automotive mechatronics technicians. Extension component set TP 1024 8115716 Necessary accessory, also order: Complete equipment set TP 1011 or 571780 Complete equipment set TP 1011 M 8029635 Recommended learning material: → Course on Festo LX Fundamentals of Analog Technology, campus license (→ page 163) de 8023586 en 8023587 es 8023588 fr 8023589 Extension component set TP 1025 8106705 Necessary accessory, also order: FluidSIM-Electrical Engineering (→ page 158) Complete equipment set TP 1011 or 571780 Complete equipment set TP 1011 M 8029635 Complete equipment set TP 1010 8023958 Recommended learning material: Motor Vehicle Mechatronics, campus license (→ page 17) de 8212231 en 8245162 Training content – No load difference – Output limits of the output voltage – Use of the output current limiter of an OPA – Limits of the usable input voltage common mode range – Mode of operation of a warning for low operating voltage – Mode of operation of a twilight switch – Principle of a timer with RC element – Structure and function of a window comparator – Measurement of the slew rate of an operational amplifier – Mode of operation and application of pulse-width modulation Components included: – 2x Operational amplifier – 2x 2 mm safety laboratory cables, 300 mm, red – 2x 2 mm safety laboratory cables, 300 mm, blue Training content – Troubleshooting: rear fog light, reversing light, dashboard lighting, trailer lighting, low beam, tail and brake lights – Diagnostics: instrument and dashboard lighting, fog lights, low beam, high beam and fog lights, right tail light, indicator system Components included – 1x 12 V Voltage regulator – 2x Bulb, 12 V/20 mA – 1x Key switch – 1x Pulse oscillator – 2x Lamp, 12 V/3 W – 2x Lamp LED, 12 V – 1x Normally open relay, 12 V – 1x Fuse, 1 A – 1x Fuse, 2 A – 2x Switch Electricity and Electronics > Training Packages
RkJQdWJsaXNoZXIy MzE0OTAwNw==