24-month Festo Didactic warranty → www.festo-didactic.com 94 95 Learning factory kit > Single workpiece flow > MPS stations The MPS Packaging station D deals with the pneumatic control of a complex packaging process, and the control of stepper motors by motor controllers. The station also provides an introduction to the use of digital sensors. The station packs workpieces in an automated process. A conveyor carries the workpiece into the collecting position of the Two-Axis Handling module. The Packaging module takes a carton out, unfolds the carton, and prepares the carton for loading. The Two-Axis Handling module conveys the workpiece into the carton: this operation is carried out by a stepper motor in the X-axis and a precision-controlled cylinder in the Z-axis. The carton is closed and passed on to the Conveyor module. The Conveyor module transports the packed workpiece to the end position. A stepper motor with controller moves the linear axis to particular positions with high positioning accuracy. Pneumatic end position sensors detect the cylinder position and control the packaging mechanism. Packaging station Complex mechanical handling processes Learning factory kit > Single workpiece flow > MPS stations Packaging station, mounted 8062644 Additional equipment, also order: MPS trolley 700 x 350 8033590 Control console, SysLink 195764 EduTrainer Universal A4 Rack with SIMATIC S7-1512C-1PN 8095754 3x I/O data cable with SysLink connectors IEEE 488 34031 Simulation box, digital 170643 I/O data cable with SysLink connectors (IEEE 488), crossover 167106 PA workpiece set 554301 The most important components at a glance: 1x Aluminum profile plate, 700 x 350 mm, with cable guide 170395 1x Conveyor module, 350 x 40 mm, DC motor 8032692 1x Two-axis handling module with a stepper motor 8049257 1x Packaging module 8043505 1x Start-up valve with filter control valve 540691 1x Cable holder with hook-and-loop fastener (pack of 10) 8034300 1x C interface 8025738 1x Quick-Fix clamping adapter 8026327 Box size 1 (50 piece) (L x W x H): 48 x 42 x 50 8064300 Box size 2 (50 piece) (L x W x H): 48 x 42 x 60 8064301 Technical data – Operating pressure: 600 kPa (6 bar) – Power supply: 24 V DC, 4.5 A – Square/round workpiece dimensions: max. 40 mm – 15 digital input signals – 14 digital output signals – Dimensions (W x D x H): 350 x 700 x approx. 900 mm Packaging station with additional equipment Recommended accessories: Training content – Familiarity with the various functions of the MPS Packaging station D – Understanding of common packaging processes – Acquisition of basic PLC programming skills – Introduction to pneumatic control systems – Introduction to the functioning and use of sensors and actuators – Control of stepper motors with a motor controller – Conveyor belt control – Adjustment of complex mechanical or pneumatic modules Benefits – The modularity of the Festo Didactic training systems makes it possible to use the MPS Packaging station D for a variety of different projects. – The station can be used individually or together with other stations at various points in a system or process. – With the aid of this station, the students develop basic knowledge of common packaging processes and of control of a stepper motor using a motor controller. Recommended training media Courseware Complete overview → page 270 For example: eLearning course – Sensoren zur Objekterkennung – PLC Programming – GRAFCET eTheory course – CIROS – First steps eLab course – CIROS – Basics of 3D Simulation Workbook – Basic level PLC programming – Advanced level PLC programming Evaluation – Basics of PLC Programming – Basics of GRAFCET Programming User Guides – CIROS – Installation Instructions
RkJQdWJsaXNoZXIy MzE0OTAwNw==