對於有興趣在電子設備製造領域使用自動化流程代替人工工序的人士，Festo 的最新技術為其解鎖了巨大潛力。機器製造商也將從我們豐富的自動化專業知識中受益。
移載：降低成本，節省空間
在移載應用中，智慧型手機外殼能夠可靠地從輸送帶上取下或放回原處。
我們提供了一種經濟高效率且節省空間的移載系統，非常適合此類應用，該系統由以下經久驗證的機械組件組成：直線電缸 ELGC、小型滑台式電缸 EGSC 和旋轉電缸 ERMO。
該運動系統也可在後期階段用於製造過程中幾乎所有必要移載操作。選擇馬達和驅動器時，請利用所有選項，從具有基本功能的解決方案到高性能版本。
我們還專門為亞洲製造商開發了伺服馬達 EMMB-AS 和馬達控制器 CMMB-AS，包括基於脈衝序列技術的介面選項以及防護等級高達 IP20 的連接器。
前端裝置包括作為 Z 軸的小型滑台式電缸 EGSC、旋轉電缸 ERMO、精巧輕巧的真空產生器 OVEL、真空吸盤 ESG 以及用於工件偵測的視覺感測器 SBSI。
鎖螺絲：精準放置並緊固
要將印刷電路板組裝到智慧型手機外殼中，必須先將其從工件托架中取下。
為此，使用直線電缸 ELGA 抬起並移動工件托架。然後將印刷電路板 (PCB) 精準地放置在外殼中，並用自動螺絲刀固定，同時由我們的影像處理系統進行監控。無需費時的人工操作，而是透過導向桿氣缸 DFM 對準並固定外殼。壓力感測器 SPAN 指示夾緊氣缸的壓力水平。
氣動系統由新型模組化控制器 CPX-E 和 Festo 核心產品法內中價格實惠的閥島 VTUG 共同控制。結合我們的模組化自動化理念，在這種情況下，該電動移載單元還包括直線電缸 ELGC 和小型滑台式電缸 EGSC。該系統非常特別，因為所有電缸都直接連接，並未使用轉接板。
Dispensing: simply faster and to the point
In both cases, guided drives DFM align the incoming workpieces and then clamp them. Pressure sensors SPAN indicate the pressure level of the clamping cylinders. Finally, the proportional pressure regulator VEAB precisely controls the amount of adhesive to be applied. Additional benefits of automation include no protruding adhesive, no rework and less adhesive consumption.
Press-fitting: evenly and controlled
The workpiece is moved pneumatically within the application by a system consisting of rodless linear drive DLGF, guided compact drive ADNGF, vacuum generator OVEL and vacuum gripper ESG.
The servo press kit YJKP is considerably less expensive than conventional press systems, giving you a significant competitive edge when it comes to productivity.
Stacking and packing at high speed right from the start
Our image processing system for detecting and aligning the smartphones ensures that this is done with the required precision. The smartphones are then placed in the magazines using a cantilever system consisting of standard electric linear drives EGC and ELGC with rotary drive ERMO and gripper HGPT. The magazines are also moved up and down using the standard linear drives EGC.
Testing: safe, secure and fully automated
The individual workpiece carriers are secured in the testing device by several compact cylinders DPDM. Our compact handling system EXCM and the new and very short mini slide DGST support the testing of the touch display, while the electric mini slide EGSC precisely connects the plug for the electric function test to the smartphone.