Output module

CPX-8DA-H

550204

Product Documentation

Product Documentation

Total (Please check cart for final price)

Configurator is not supported on mobile devices

Recommended Accessories

Technical Data

Support / Downloads

Close Technical Data

Show Technical Data

Dimensions W x L x H: (incl. interlinking block and connection system)
50 mm x 107 mm x 50 mm
No. of outputs: 8
Diagnostics: Short circuit/overload per channel
Undervoltage of outputs
Parameterization: Fail-safe modes per channel
Forcing per channel
Idle mode per channel
Response to short circuit
Module monitoring
LED indicators: 1 group diagnostics
8 channel diagnostics
8 channel status
Fuse protection (short circuit): Internal electronic fuse per channel
Additional safety fuse
DC operating voltage range: 18 V ... 30 V
Intrinsic current consumption at nominal operating voltage: Typ. 34 mA
Max. power supply per channel: 2.1 A (50 W lamp load), per channel pair
Max. residual current of outputs per module: 8.4 A
Nominal operating voltage DC: 24 V
Electrical isolation between channel and internal bus: Yes, when using intermediate feed
Electrical isolation between channels: no
Corrosion resistance class (CRC): 1 - Low corrosion stress
(when installed)
Storage temperature: -20 °C ... 70 °C
Degree of protection: Depends on manifold block
Ambient temperature: -5 °C ... 50 °C
Product weight: 48 g
Characteristic curve outputs: Based on IEC1131-T2
Switching logic at outputs: PNP (positive switching)
Housing material: PA-reinforced
PC