Hit enter to search or ESC to close

Actuators with guide rods

Learn more about Actuators with guide rods
Filter
Filter
9 Results

Selection Guide

Guided drive DGRF

The clean design of the Festo pneumatic drive DGRF makes it suitable for use in the food and beverage industry. Characteristic features of the guided actuator DGRF are the easy-to-clean surfaces, the resistance to corrosion and detergents, and the use of NSF-H1-compliant grease.
Thanks to the optional design with dry-running seal design, the DGRF will continue to function reliably even if the lubricating grease has been washed away due to frequent cleaning.
Three cushioning options offer a suitable solution even for different applications. These include the self-adjusting pneumatic cushioning PPS. This requires no dirt-susceptible adjusting screw and thus always enables fast and convenient cleaning of the DGRF.

Guided drive DFP

The Festo pneumatic drive DFP is robust, resilient and very compact thanks to its integrated guide rod. The integrated recirculating ball bearing guide ensures backlash-free positioning of the guided actuator DFP.
Versatile mounting options with internal threads or through-holes also enable flexible and simple mounting of the actuator.

Compact cylinder ADNGF, metric

The ADNGF is a non-rotating compact pneumatic cylinder based on the ADN. Unlike the ADN, the ADNGF is equipped with two integrated guide rods and a yoke plate. This eliminates the piston rod thread that is otherwise common in cylinders.

Compact cylinder ADNGF, inches

The ADNGF inch is a non-rotating compact cylinder for the North American market and differs from the ADNGF primarily in the air connections. Depending on the size, the air connections are designed as UNF or NPT threads.

Compact cylinder ADVUL

The ADVUL is the predecessor model of the non-rotating ADNGF compact cylinder. This cylinder is mainly used in existing systems.

Mini guided drive DFC

The Festo pneumatic actuator DFC combines the features of a guided actuator with a very compact and small-scale design. The DFC is available with a low-cost and load-bearing sliding guide or alternatively with a backlash-free and precise ball guide. The high flexibility due to versatile fastening and mounting options on the basic actuator body, slide and yoke plate make the DFC a system product for small-scale handling and assembly technology.

Guided drive DFM, metric

The Festo pneumatic drive DFM is very robust, resilient and compact thanks to its integrated guide rods. The guided actuator DFM is available with a low-cost and load-bearing sliding guide or with a backlash-free and precise ball guide. Strokes up to 400 mm and the high flexibility due to versatile fastening, adaptation and mounting options on the basic actuator body and yoke plate make the DFM a system product for simple handling and assembly technology. In addition to elastic cushioning, other stroke adjustment possibilities such as pneumatic cushioning and hydraulic shock absorbers are optionally available.

Guided drive DFM, inches

The Festo pneumatic drive DFM is very robust, resilient and compact thanks to its integrated guide rods. The guided actuator DFM is available with a low-cost and load-bearing sliding guide or with a backlash-free and precise ball guide. Strokes up to 400 mm and the high flexibility due to versatile fastening, adaptation and mounting options on the basic actuator body and yoke plate make the DFM a system product for simple handling and assembly technology. In addition to elastic cushioning, other stroke adjustment possibilities such as pneumatic cushioning and hydraulic shock absorbers are also available.

Dual piston rod cylinder (Twin) DPZ

Despite its compact design, the Festo pneumatic double piston actuator [W+W1] DPZ achieves up to 1,000 N feed force. Thanks to the two piston rods, the DPZ is also resistant to high loads and lateral forces. The guided actuator DFZ is available with a low-cost and load-bearing sliding guide or alternatively with a backlash-free and precise ball guide.
The high flexibility due to versatile fastening, adaptation and mounting options on the basic actuator body and yoke plate make the DFM a system product for simple handling and assembly technology.

Linear units SLE

The Festo pneumatic linear unit SLE is a combination of a guide unit and an ISO cylinder. The modular principle enables individual choice of end-position cushioning and sensing The integrated recirculating ball bearing guide ensures backlash-free positioning of the guided linear drive unit SLE. The high flexibility due to versatile fastening, adaptation and mounting options on the basic actuator body and yoke plate make the linear drive unit SLE a system product for handling and assembly technology.