Filter regulator lubricator

Learn more about Filter regulator lubricator
MS series

MS series

Sizes 4, 6

Connection G1/8, G1/4, G3/8, G1/2, also available with NPT thread

Pressure 0.3 ... 7 bar, 0.5 ... 12 bar

Flow rate 800 ... 4800 l/min

Pressure gauge with bar, psi, MPa

Grade of filtration 40 µm, 5 µm

Condensate drains

- Manual

- Fully automatic

Plastic bowl with plastic bowl guard

Metal bowl guard

Flow direction

- From left to right

- From right to left

Proportional lubricator.

D series, metal design

D series, metal design

Size MICRO, MINI, MIDI, MAXI

Connection M5, M7, G1/8, G1/4, G3/8, G1/2, G3/4, G1, QS4, QS6, also available with NPT thread

Pressure 0.5 ... 7 bar, 0.5 ... 12 bar, 2.5 ... 12 bar

Flow rate 90 ... 8700 l/min

Pressure gauges

- With pressure gauge

- Without pressure gauge

Grade of filtration 40 µm, 5 µm

Condensate drains

- Manual

- Semi-automatic

- Fully automatic

Plastic bowl with metal bowl guard

Direct proportional lubricator.

D series, polymer

D series, polymer

Reliable compressed air treatment for applications in noncritical environments

Compatible with Festo's D series

One size with G1/8 or G1/4 connection.

Selection Guide

Series MS

The MS series offers the widest variety of filter regulator lubricators, ideal for every application. The MS-FRC unit offers good particle separation at high flow rates and good control characteristics. The lubricator then supplies the compressed air with a finely dosable quantity of oil. The filter regulator lubricator can be ordered as a complete combination from stock or configured as a module according to the simple modular system of the MS series. The housings are made of die-cast aluminum, the filter bowls are optionally made of metal or polycarbonate with bowl guard and can be combined with all common condensate drain systems.

Series D, metal

The D series offers the most common basic options of filter regulator lubricator units. The FRC unit offers good particle separation at high flow rates and good control characteristics. The filter regulator lubricator unit is constructed using the tie rod connection system of the D series. The housings are made of die-cast zinc, the filter bowl of polycarbonate with aluminum bowl guard, also with fully automatic or manually operated condensate drain.

Series D, polymer

The D series with plastic housing offers a basic range of filter regulator lubricator units in one size. The housings are made of reinforced polyamide with thread, the filter bowl of polycarbonate; they can be combined with manual or semi-automatic condensate drain. The FRC unit in polymer is characterized by its low weight.